[Amps] Where is power measured ?

[Jack/W6NF]

That management attitude is why I am no longer in broadcasting. On my 5
tower array (4 tower DA night and a fifth, center, tower as a non-DA
daytime) I always measured field strength at least monthly. We had to
protect a Canadian station at night and had a *very* deep null toward VE so
my measurements were more critical than most.

Too bad such good engineering practice has become optional.

73,


On Thu, Apr 7, 2011 at 5:08 AM, <donroden at hiwaay.net> wrote:

> Quoting Paul Manuel <k4pdm at yahoo.com>:
> > Field strength measurements are normally not required for broadcast
> stations.
> > 73, Paul K4PDM
>
> I measure my directionals every month and my non-directionals at LEAST
> four times a year. You need to know where you are before you can know
> where you are going. Yes, the FCC has relaxed the rules from
> "required" to "recommended"
> and many owners have taken that to mean " unnecessary".
>
> It's analogous to not requiring a speedometer in your car......... but
> , you better have some way to prove you weren't exceeding the speed
> limit if the radar gun says otherwise.
>
> Don W4DNR
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>



-- 
Jack, W6NF
Silver Springs, NV
DM09ji