[Amps] New Alpha 8410 photos

damon stewart wsmc551 at gmail.com
Sun Mar 6 15:40:47 PST 2011


Pete,

The blower noise is not objectionable at all.  Its slightly louder then a
desktop computer, very quite for a 2KW + amp.  I did manage to get the
blower to kick up to medium speed but that was not all the loud either.
About the sound, its a DC brushless motor and what noise there is slightly
rough.  Its like you can hear the strong magnetic flux on the motor as it
spins.  I also found if the amp is flat on the table and not on the front
stand the motor noise is attenuated even further.



On Sat, Mar 5, 2011 at 7:53 AM, Pete Smith <n4zr at contesting.com> wrote:

> That blower is an interesting design, Damon - drawing across wide
> opening inside the amplifier.  How is the blower noise?
>
> 73, Pete N4ZR
>
> The World Contest Station Database, updated daily at
> www.conteststations.com
> The Reverse Beacon Network at http://reversebeacon.net, blog at
> reversebeacon.blogspot.com,
> spots at telnet.reversebeacon.net, port 7000
>
>
>
> On 3/4/2011 3:58 PM, damon stewart wrote:
> > Just received my Alpha 8410 last night.  Took a few photos while I had
> the
> > cover off installing the transformer.   I posted the photos to my
> > photobucket album for those who love to look at the insides as much as I
> do.
> >
> >
> > http://s241.photobucket.com/albums/ff146/wsmc551/Ham%20Radio/
> >
> > So far I am really pleased and impressed with this amp.  Nice small quite
> > and capable package filled with quality construction.   I wont have time
> to
> > do much testing until next week but just some preliminary tests 33 watts
> in
> > = 1500 out 0.8 IP,  47 watts in = 2050 out 1.1 IP no illumination of
> ether
> > the green or red gird current LED's yet.  There is a lot more headroom
> left
> > in there.   Initial audio reports indicate NO perceptible EBC distortion
> > products, very clean audio.
> >
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>



-- 
Damon Stewart, KJ7E


More information about the Amps mailing list