[Amps] WTB Supplemental Question: E.F. Johnson socket#124-311-100 for Co...

[TexasRF at aol.com]

Hi All, correct me if this wrong: The Johnson socket has the same pin out  
as a compactron socket. An Ebay search for Compactron Socket turns up many 
of  them priced from a couple of $$ up.
 
Seems like the air holes and base cover would not be too hard to add.
 
73,
Gerald K5GW
 
 
 
 
 
 
In a message dated 4/3/2012 10:25:11 A.M. Central Daylight Time,  
km1h at jeremy.mv.com writes:

The  standard Eimac chimney has its own mounting hardware but if I remember 
its  not what was used in the Command.
The LK-800's used the Eimac style which  often melted to the tube even in 
commercial  products.

Carl
KM1H


----- Original Message -----  
From: <Gudguyham at aol.com>
To: <k9mk at flash.net>;  <amps at contesting.com>
Sent: Tuesday, April 03, 2012 11:02  AM
Subject: Re: [Amps] WTB Supplemental Question: E.F. Johnson  
socket#124-311-100 for Co...


>I am pretty sure the socket is  separate from the air system just like the
> Johnson socket on an  8877.  The socket is simply a phenolic type 11 pin
> socket then it  gets bolted to the air system. I think.
>
>
> In a message  dated 4/3/2012 10:44:13 A.M. Eastern Daylight Time,
> k9mk at flash.net  writes:
>
> Thanks  to the many for your  replies.
>
> I have looked at RF parts and the graphic  on  the substitute only shows 
> only
> an 11 pin  socket.
>
> In the Commander  II I have, the 11 pin socket  appears to be part of a 
air
> system like socket  with a flange  collar to the chassis and also a finger
> stock grid   ring.
>
> Is it possible the RF Parts socket a sub assembly of  the  collar flange?
>
> Thanks again for everyone help  here.
>
> 73   Mike  K9MK
>
>
>
>
>
>
>
>  -----Original Message-----
> From:  amps-bounces at contesting.com  [mailto:amps-bounces at contesting.com] 
On
> Behalf  Of Mike &  Becca Krzystyniak
> Sent: Tuesday, April 03, 2012 8:32  AM
>  To: amps at contesting.com
> Subject: [Amps] WTB: E.F. Johnson socket   #124-311-100 for Commander II 
> amp
> (early Stein  model)
>
>
> Spent some time looking around the web for one  one of these sockets  for
> a 3CX800A7 with little  success.
>
> Does anyone  have any sources for  these?
>
> E.F. Johnson socket  #124-311-100   a.k.a.   Eimac SK-1900
>
> Thanks  in  advance.
>
> 73  Mike   K9MK
>
>
>
>
>
>
>
>  _______________________________________________
> Amps   mailing  list
> Amps at contesting.com
>  http://lists.contesting.com/mailman/listinfo/amps
>
>  _______________________________________________
> Amps   mailing  list
> Amps at contesting.com
>  http://lists.contesting.com/mailman/listinfo/amps
>
>  _______________________________________________
> Amps mailing  list
> Amps at contesting.com
>  http://lists.contesting.com/mailman/listinfo/amps
>
>
>  -----
> No virus found in this message.
> Checked by AVG -  www.avg.com
> Version: 10.0.1424 / Virus Database: 2113/4911 - Release  Date: 04/02/12
>  

_______________________________________________
Amps mailing  list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps