[Amps] RE; 3K

[SavanaPics at aol.com]

Thanks for all of the responses. With help of my fellow members, I was able 
 to remove the plug without damage and repair the blower motor.  
 
Happy DXing
Eddie, kc4awz
 
 
In a message dated 8/16/2012 6:58:46 P.M. Eastern Daylight Time,  
ab5mm at argontech.net writes:

Message:  4
Date: Thu, 16 Aug 2012 10:05:47 -0400  (EDT)
From:SavanaPics at aol.com
Subject: [Amps] Henry 3k Teardrop  Amp
To:amps at contesting.com
Message-ID:<6a039.6ca2fb5e.3d5e583b at aol.com>
Content-Type:  text/plain; charset="US-ASCII"

I have a Henry 3k with teardrop meters.  Evidently this is one of the first
the produced as most of the 3k  information I can find has square or
rectangular  meters on them even  though they are posted as 3k's also. None 
the
less. The  reason for  this posting is two fold. One that I have an original
manual and  if  anyone needs a copy, I can email them a PDF of it.

The second is  that The blower is not working, so I need to remove the RF
deck from the  amp.  There are two wires (filament), and a multiple pinned
plug  attached to the RF deck,  There is also a smaller plug that you   
unscrew
, but it does not seem to want to come loose.. Does anyone have  any
experience with this amp and can tell me how to remove this plug so I  can 
take  the
RF deck off ?

Eddie Turner,  kc4awz
-----------------------
Eddie,

If you'll look on the  schematic in your manual, it should be labeled J2.
It's the B+ (spark plug  wire) from the power supply to the RF deck.
They fit tight, especially if  someone over tightened it. You'll have to
pull fairly hard straight down to  break it loose. You can wiggle it from
side to side and see if this  movement will dislodge it.

73's & Good Luck

Steve  AB5MM

_______________________________________________
Amps mailing  list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps