[Amps] Ten Tec Titan 425 Options

[Vic Rosenthal]

New caps from Ameritron would cost a bit over $100. Diodes are cheap and bleeder resistors available from Mouser reasonably. I can't imagine where the $800 figure came from. Find someone else to fix your amp.

Vic K2VCO

On Nov 9, 2012, at 6:39 AM, "Gary \"Joe\" Mayfield" <gary_mayfield at hotmail.com> wrote:

> A little over a year ago I acquired a working Ten Tec Titan 425.  It spent a
> year in the closet as I had nothing to load it into.  I finally got the new
> antenna up and turned on the amplifier.  After about 30 minutes the fuses
> popped and the amp was dead.
> 
> I took it to Burghardt Radio Repair and Jim said the transformer was good,
> but most of the rest of the supply was toast.  I believe him as he has
> always been fair and square with me.
> 
> He said there was a mod that added another diode to each leg of the bridge
> that probably would have saved me.  I paid him for the diagnosis and brought
> the amp and supply home.  The bad news is the caps alone are around $800.
> Other parts, labor and I am probably looking at $1200 or more.  I don't have
> that kind of cash and if I did I'm not sure this would be the most effective
> way to spend it.  So, I am trying to figure out my options. 
> 
> Any suggestions?
> 
> Thanks and 73,
> Joe kk0sd
> 
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps