[Amps] TenTec Titan 425 Idle Grid Current

[Vic K2VCO]

I should have added in my original message that of course some kind of problem in the 
metering circuitry could cause a meter deflection even if there is no actual grid current 
flowing.

On 9/25/2012 8:07 PM, Jim W7RY wrote:
> Not normal. You have a problem somewhere.
>
> 73
> Jim W7RY
>
>
> -----Original Message----- From: Mark Robinson
> Sent: Tuesday, September 25, 2012 5:35 PM
> To: amps at contesting.com
> Subject: [Amps] TenTec Titan 425 Idle Grid Current
>
> I noticed today on my TenTec Titan 425 that the grid idle current is around 7 or 8mA on
> the Ig meter. I see this on the amp when I key my TS930S in ssb with no drive.
> (modulation).  I don't recall seeing this before. Is this normal or is there a bias issue
> that I should look at?
>
>
> 73 Mark N1UK
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps

-- 
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco/