[Amps] Dummy load. Can distilled water be used instead of oil ?
Paul Christensen
w9ac at arrl.net
Sun Aug 11 14:59:27 EDT 2013
> Heck, Bird + CD have water loads that use tap water.
Used Altronic loads like the 9705 are typically under USD $500 used and about $900 new. The 9705 is good to 5KW and higher power models are even more prevalent on the used market. They do require running tap water at about 2-5 gal./min. and can be connected with a standard 3/4-inch garden hose. A flow sensor is interlocked with the transmitter to kill power when flow drops.
During college, I used a 25kw model connected to a deep sink. Crank the tap on the faucet and start pumping out serious power. Hot water output is dispensed in a sink drain. Even at 25kw, the resulting water with adequate flow feels quite warm but never hot.
Paul W9AC
Sent from my iPhone5
More information about the Amps
mailing list