[Amps] Fw: LK-500Z output on 10m

[Carl]

Absolutely not, that "professional" sounds clueless. My own 500ZC and all 
the others Ive worked on run 1200W on 10M with ease.

Carl
KM1H


----- Original Message ----- 
From: "Vasiliy - K3IT" <gokoyev+k3it at gmail.com>
To: <amps at contesting.com>
Sent: Thursday, January 31, 2013 11:37 PM
Subject: [Amps] LK-500Z output on 10m


> I'm looking for some info on what should be a typical output for the
> LK-500ZB amp on 10 meters.   I'm getting 1200W easily on all bands except
> 28Mhz.  The 10m mod is installed.  There was the following note included
> with amp (from a person servicing them professionally):
>
>> tests produced a measured output of at least 1,000 carrier watts EXCEPT
> 10 meters, which would only produce about 240 watts out due to design
> limitations of the pi network.  It is not recommended 10 meters be used
>
> does it sound right?
>
> 73
> Vasiliy
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1430 / Virus Database: 2639/5572 - Release Date: 01/31/13
>