[Amps] Peter Dahl transformers

[Carl]

While I dont doubt that I see a large number of CB transformers and Im sure 
a number of  super power hams also. The giveaway that these are not for 
commercial use is the single phase construction no matter what the kVA 
except for 2 listed and one is for CB mobile use. He is also not shy about 
it either and shows a photo.

The ICAS ratings vs weight is also interesting and even less than OEM in 
Heath, Dentron, etc, and I do not see a Style description listed.

Carl




----- Original Message ----- 
From: "Paul Christensen" <w9ac at arrl.net>
To: <amps at contesting.com>
Sent: Monday, February 11, 2013 2:03 PM
Subject: Re: [Amps] Peter Dahl transformers


>A few months ago, EPD was highly recommended to me by Reid Brandon when he 
>was still with Eimac.
>
> Paul, W9AC
>
> ----- Original Message ----- 
> From: "Coffey" <coffey at starfishnet.com>
> To: <amps at contesting.com>
> Sent: Sunday, February 10, 2013 3:04 PM
> Subject: Re: [Amps] Peter Dahl transformers
>
>
>> Have no fear about Harbach not making transformers.  My friend Peter 
>> Eggimann has been making HV transformers since 1983 and has all the  Dahl’s 
>> data and specs from years  ago. He has a nice manufacturing facility in 
>> Wendell, N.C........EPD    ....Electronic Products Design, 
>> Inc......website: epd-inc.com. I was a customer before I retired and now 
>> as a hobby amp builder.......Gary, K4AVC
>> _______________________________________________
>> Amps mailing list
>> Amps at contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1430 / Virus Database: 2639/5596 - Release Date: 02/11/13
>