[Amps] FW: 4CX1000 removal - Disregard

Roger (K8RI) k8ri at rogerhalstead.com
Tue Feb 19 16:41:35 EST 2013


On 2/18/2013 4:27 PM, Bill Coleman wrote:
> Disregard!   Younger fingers than mine have prevailed!
>

Although you've solved the problem I though I'd throw this out in case 
some one else might have this problem.

Try one of the thin rubber disks used to get a better grip when opening 
jars with the screw on tops.

73

Roger (K8RI)


>
>
> From: Bill Coleman [mailto:n2bc at stny.rr.com]
> Sent: Monday, February 18, 2013 3:14 PM
> To: amps at contesting.com
> Subject: 4CX1000 removal
>
>
>
> The tube anode cooler is only about ¼” above the chimney. I cannot get
> enough grip to rotate the tube.  Removing the chimney is almost out of the
> question – lots of other stuff is in the way.
>
> I’m thinking about making a tool that I clamp on the center anode post to
> give me some leverage.
>
> Any reason to not apply rotational force to the post??
>
> THANKS – and other ideas welcome!   73, Bill  N2BC
>
>
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>




More information about the Amps mailing list