[Amps] Henry transformer

[Glen Zook]

The EC-1028 was used in the Henry 2000D amplifier.

As for the primary / secondary connections, yes, the primary connections are made through machine screw terminals and the secondary connections made through VERY large solder terminals.
 
Glen, K9STH


Website:  http://k9sth.com


________________________________
 From: Shagbark Acres <gbenko at prodigy.net>
To: Donald Fox <taurusshoguy at yahoo.com>; "amps at contesting.com" <amps at contesting.com> 
Sent: Monday, July 29, 2013 8:19 AM
Subject: Re: [Amps] Henry transformer
 

Transformers used in Henry Amplifiers   
 
1171A, 3900 VDC @ 800 MA CCS  (as used in 3KA, 2K Classic X, 3K Classic X, amps with 8877or two 3-500 
 
1214A, 4400 VDC @ 800 MA CCS  (as used in 3K Premier, 3K ULTRA, 3K Classic X MKII, amps with 3CX1200A7 

 
George K8BRW



________________________________
From: Donald Fox <taurusshoguy at yahoo.com>
To: amps at contesting.com 
Sent: Monday, July 29, 2013 9:06 AM
Subject: [Amps] Henry transformer


Mike and Glen:

Henry used the ECA transformers in the 80's and 90's from what I have learned by working on them.
I believe you have the primary/secondary relationship reversed though.

Typcially, the primary on these is the mounted screw terminals and the secondaries are the large three solder lugs.
Most if not all of the Henry console type amps are choke input filtering, so the AC rating on these puppies is higher than it would be for a typical capacitive filter system.
I expect that the secondary on that thing will be 4000, 5000, or even 6000 volts AC which is a bunch. 
An email to Ted Henry may tell you all you need to know.

D