[Amps] Advice needed for SS amp
Jim Thomson
jim.thom at telus.net
Thu Jun 6 12:58:05 EDT 2013
Date: Thu, 06 Jun 2013 08:24:58 -0600
From: Larry Benko <xxw0qe at comcast.net>
To: amps at contesting.com
Subject: Re: [Amps] Advice needed for SS amp
2000W of power(heat) into 1 gallon of pure water raises the temperature
7.7deg. C (13.7deg. F) per minute. Anything you do to water such as
mixing in alcohol reduces the cooling capacity somewhat. In a total
loss system where the water would be run through the amp and then out
into the garden a flow of 1 quart (or ~ 1 liter) per minute would suffice.
Larry, W0QE
## are you sure about that ? IF the cold tapwater was 50 F, it would take 11.8 mins to reach
boiling. It does not take more than 5 mins to boil 1/2 gallon of water in my 1500 w kettle.
Jim VE7RF
More information about the Amps
mailing list