[Amps] GS23B Plate load resistance for HF / audio analogy

[Jeff Blaine]

Bill,

I used these VA3YP sockets in the SB200 overhaul for the GI7b.  They are 
real works of machine art.

I would really recommend these in the case a guy has a frequent need to pull 
tubes (as was my case) - or for anyone who wants the best socket out there.

There is an argument that they are overkill.  But I think overkill is 
usually underrated!

73/jeff/ac0c
www.ac0c.com
alpha-charlie-zero-charlie

-----Original Message----- 
From: Bill Turner
Sent: Thursday, October 31, 2013 10:49 PM
To: Amps
Subject: Re: [Amps] GS23B Plate load resistance for HF / audio analogy

ORIGINAL MESSAGE:          (may be snipped)

On Fri, 1 Nov 2013 09:36:59 +1030, Leigh wrote:

>
>The NOS GS-35B Triode and GS-23B Tetrode are a tremendous bang for the 
>buck;
>particularly in amateur UHF amplifier service.

REPLY:

I see that sockets for both of these tubes are available from VA3YP, who
builds them himself. Expensive, but probably worth it. I have not used them
myself. Available on eBay.

73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps