November 2013 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Fri Nov 1 00:00:42 EDT 2013
Ending: Sat Nov 30 18:44:02 EST 2013
Messages: 449

• [Amps] where to begin   Roger (K8RI)
• [Amps] [amps] West Coast Handbook   Roger (K8RI)
• [Amps] Question for the tetrode experts   Roger (K8RI)
• [Amps] Screen current problem solved!   Roger (K8RI)
• [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good..   Roger (K8RI)
• [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good..   Roger (K8RI)
• [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good..   Roger (K8RI)
• [Amps] UHF Connectors   Roger (K8RI)
• [Amps] UHF Connectors   Roger (K8RI)
• [Amps] UHF Connectors   Roger (K8RI)
• [Amps] UHF Connectors   Roger (K8RI)
• [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE   Roger (K8RI)
• [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE   Roger (K8RI)
• [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE   Roger (K8RI)
• [Amps] Chinese 4CX1000A from Alpha   Roger (K8RI)
• [Amps] Chinese 4CX1000A from Alpha   Roger (K8RI)
• [Amps] Crimp connector die sizes   Roger (K8RI)
• [Amps] where to begin   Ulf (SM0NOR)
• [Amps] Best source for Gigavac GH-1 ?   MU 4CX250B
• [Amps] Best source for Gigavac GH-1 ?   MU 4CX250B
• [Amps] wire paint Re: Amps Digest, Vol 131, Issue 64   Kevin Adam
• [Amps] Measuring IMD   Jim Barber
• [Amps] Two-tone test file uploaded   Jim Barber
• [Amps] Measuring IMD   Jim Barber
• [Amps] Measuring IMD   Jim Barber
• [Amps] Measuring IMD   Jim Barber
• [Amps] Chinese 15KV 2A rectifier modules?   Jim Barber
• [Amps] Chinese 15KV 2A rectifier modules?   Jim Barber
• [Amps] Alpha chimneys   Jim Barber
• [Amps] Best source for Gigavac GH-1 ?   Jim Barber
• [Amps] Screen current problem solved!   Jim Barber
• [Amps] PW1 and Quadra voltage problems   Joe Barnes
• [Amps] Hardline connectors wanted   Gregory Beat
• [Amps] [amps] West Coast Handbook   Gregory Beat
• [Amps] UHF CONNECTORS AND CRIMP DIES   Gregory Beat
• [Amps] RF Industries Crimp Dies   Gregory Beat
• [Amps] Best source for Gigavac GH-1 ?   Larry Benko
• [Amps] Best source for Gigavac GH-1 ?   Larry Benko
• [Amps] Best source for Gigavac GH-1 ?   Larry Benko
• [Amps] All the recent UHF connector discussion   Larry Benko
• [Amps] All the recent UHF connector discussion   Larry Benko
• [Amps] Discrepencies in Pi-net calculators   Larry Benko
• [Amps] Discrepencies in Pi-net calculators   Larry Benko
• [Amps] GS23B Plate load resistance for HF / audio analogy   Jeff Blaine
• [Amps] TL922 on 12/17   Jeff Blaine
• [Amps] TL922 on 12/17   Jeff Blaine
• [Amps] Measuring IMD   Jeff Blaine
• [Amps] TL922 on 12/17   Jeff Blaine
• [Amps] GH-1 GH-1 HAM Relays   Dave Bowker
• [Amps] Command Technologies HF2500   Brian Sarkisian, KG8CO
• [Amps] Command Technologies HF-2500   Brian Sarkisian, KG8CO
• [Amps] Measuring IMD   Jim Brown
• [Amps] Best source for Gigavac GH-1 ?   Jim Brown
• [Amps] Best source for Gigavac GH-1 ?   Jim Brown
• [Amps] Best source for Gigavac GH-1 ?   Jim Brown
• [Amps] UHF Connectors   Jim Brown
• [Amps] UHF Connectors   Jim Brown
• [Amps] UHF Connectors   Jim Brown
• [Amps] All the recent UHF connector discussion   Jim Brown
• [Amps]  GS23B Plate load resistance for HF   Carl
• [Amps] Measuring IMD   Carl
• [Amps] Measuring IMD   Carl
• [Amps] Initial RF testing of 4CX1000A amplifier   Carl
• [Amps] Looking for picture of SB220 interlock switch   Carl
• [Amps] Initial RF testing of 4CX1000A amplifier   Carl
• [Amps] Initial RF testing of 4CX1000A amplifier   Carl
• [Amps] AL-82 opinions   Carl
• [Amps] FAN SPEED   Carl
• [Amps] AL-82 opinions   Carl
• [Amps] where to begin   Carl
• [Amps] Looking for picture of SB220 interlock switch   Carl
• [Amps] where to begin   Carl
• [Amps] Looking for picture of SB220 interlock switch   Carl
• [Amps] AL-82 opinions   Carl
• [Amps] [RTTY] AL-1500 on RTTY   Carl
• [Amps] Question for the tetrode experts   Carl
• [Amps] Looking for picture of SB220 interlock switch   Carl
• [Amps] AL-82 opinions   Carl
• [Amps] Question for the tetrode experts   Carl
• [Amps] Question for the tetrode experts   Carl
• [Amps] Question for the tetrode experts   Carl
• [Amps] Alpha chimneys   Carl
• [Amps] Plate Choke question   Carl
• [Amps] Plate Choke question   Carl
• [Amps] Screen current problem solved!   Carl
• [Amps] Screen current problem solved!   Carl
• [Amps] Best source for Gigavac GH-1 ?   Carl
• [Amps] Screen current problem solved!   Carl
• [Amps] Screen current problem solved!   Carl
• [Amps] Plate Choke question   Carl
• [Amps] Plate Choke question   Carl
• [Amps] Measuring IMD   Carl
• [Amps] Best source for Gigavac GH-1 ?   Carl
• [Amps] Plate Choke question   Carl
• [Amps] Plate Choke question   Carl
• [Amps] How much power through a BNC connector?   Carl
• [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good..   Carl
• [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good..   Carl
• [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good..**   Carl
• [Amps] UHF Connectors   Carl
• [Amps] UHF Connectors   Carl
• [Amps] meter behavior   Carl
• [Amps] Kenwood TL-922A for sale   Carl
• [Amps] All the recent UHF connector discussion   Carl
• [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE   Carl
• [Amps] All the recent UHF connector discussion   Carl
• [Amps] Chimney solved - now what about SSB/CW switch?   Carl
• [Amps] Passive grid stability calculation for a tetrode?   Carl
• [Amps] Passive grid stability calculation for a tetrode?   Carl
• [Amps] Burn-in for GU84b?   Carl
• [Amps] Commander HF-1250 problem   Carl
• [Amps] Commander HF-1250 problem   Carl
• [Amps] Commander HF-1250 problem   Carl
• [Amps] Commander HF-1250 problem   Carl
• [Amps] Commander HF-1250 problem   Carl
• [Amps] GIVE IT A BREAK! (Subject change from:Commander HF-1250problem)   Carl
• [Amps] Commander HF-1250 problem   Carl
• [Amps] Chinese FU-724F   Carl
• [Amps] Adhesive for plate choke?   Carl
• [Amps] Adhesive for plate choke?   Carl
• [Amps] AL-82 opinions   Paul Christensen
• [Amps] Yaesu FT-2000 "TX-INH" Spec?   Paul Christensen
• [Amps] Best source for Gigavac GH-1 ?   Paul Christensen
• [Amps] Best source for Gigavac GH-1 ?   Paul Christensen
• [Amps] UHF Connectors   Paul Christensen
• [Amps] meter behavior   Paul Christensen
• [Amps] UHF Connectors   Paul Christensen
• [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE   Paul Christensen
• [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE   Paul Christensen
• [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE   Paul Christensen
• [Amps] UHF CONNECTORS AND CRIMP DIES   Paul Christensen
• [Amps] Discrepencies in Pi-net calculators   Carl Clawson
• [Amps] AL-82 opinions   David Cole
• [Amps] AL-82 opinions   David Cole
• [Amps] AL-82 opinions   David Cole
• [Amps] AL-82 opinions   David Cole
• [Amps] UHF Connectors   David Cole
• [Amps] All the recent UHF connector discussion   David Cole
• [Amps] Remote monitoring of SSPA   Conrad Farlow
• [Amps] UT-300C-25 semi rigid   Conrad Farlow
• [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good..   Drax Felton
• [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE   Drax Felton
• [Amps] re alpha 8410 amplifier query   Fern
• [Amps] re alpha 8410   Fern
• [Amps] Plate Choke question   Steve Flood
• [Amps] Plate Choke question   Steve Flood
• [Amps] meter behavior   Steve Flood
• [Amps] Discrepencies in Pi-net calculators   Steve Flood
• [Amps] Discrepencies in Pi-net calculators   Steve Flood
• [Amps] Discrepencies in Pi-net calculators   Steve Flood
• [Amps] Discrepencies in Pi-net calculators   Steve Flood
• [Amps] Measuring IMD   Fuqua, Bill L
• [Amps] Measuring IMD   Fuqua, Bill L
• [Amps] Measuring IMD   Fuqua, Bill L
• [Amps] Initial RF testing of 4CX1000A amplifier   Fuqua, Bill L
• [Amps] Question for the tetrode experts   Fuqua, Bill L
• [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good..   Fuqua, Bill L
• [Amps] UHF Connectors   Fuqua, Bill L
• [Amps] meter behavior   Fuqua, Bill L
• [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good..   Fuqua, Bill L
• [Amps] Passive grid stability calculation for a tetrode?   Fuqua, Bill L
• [Amps] Passive grid stability calculation for a tetrode?   Fuqua, Bill L
• [Amps] Hardline connectors wanted   Jim Garland
• [Amps] Best source for Gigavac GH-1 ?   Jim Garland
• [Amps] Best source for Gigavac GH-1 ?   Jim Garland
• [Amps] Commander HF-1250 problem   George
• [Amps] Commander HF-1250 problem   George
• [Amps] Measuring IMD   Robert Groh
• [Amps] Looking for picture of SB220 interlock switch   Geert Jan de Groot
• [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good..   Charles Harpole
• [Amps] UHF connector discussion For Dummies   Charles Harpole
• [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE   Charles Harpole
• [Amps] Discrepencies in Pi-net calculators   Han Higasa
• [Amps] Chinese FU-724F   Hsu
• [Amps] Amps :Kenwood TL922 bandswitch replacement : spare part   Behiels JeanPierre
• [Amps] Initial RF testing of 4CX1000A amplifier   Joe Subich, W4TV
• [Amps] Looking for picture of SB220 interlock switch   Joe Subich, W4TV
• [Amps] Looking for picture of SB220 interlock switch   Joe Subich, W4TV
• [Amps] where to begin   Joe Subich, W4TV
• [Amps] Looking for picture of SB220 interlock switch   Joe Subich, W4TV
• [Amps] Best source for Gigavac GH-1 ?   John
• [Amps] Initial RF testing of 4CX1000A amplifier   Vic K2VCO
• [Amps] Initial RF testing of 4CX1000A amplifier   Vic K2VCO
• [Amps] where to begin   Vic K2VCO
• [Amps] Question for the tetrode experts   Vic K2VCO
• [Amps] Question for the tetrode experts   Vic K2VCO
• [Amps] Question for the tetrode experts   Vic K2VCO
• [Amps] Question for the tetrode experts   Vic K2VCO
• [Amps] Question for the tetrode experts   Vic K2VCO
• [Amps] Alpha chimneys   Vic K2VCO
• [Amps] Question for the tetrode experts   Vic K2VCO
• [Amps] Screen current problem solved!   Vic K2VCO
• [Amps] Best source for Gigavac GH-1 ?   Vic K2VCO
• [Amps] Chinese 4CX1000A from Alpha   Vic K2VCO
• [Amps] Chinese 4CX1000A from Alpha   Vic K2VCO
• [Amps] Commander HF-1250 problem   Vic K2VCO
• [Amps] Fan sounds like F-15   Vic K2VCO
• [Amps] Chinese 15KV 2A rectifier modules?   Gary K9GS
• [Amps] Chinese 4CX1000A from Alpha   Gary K9GS
• [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good..   KA4INM
• [Amps] Fan sounds like F-15   KA4INM
• [Amps] FAN SPEED   Edwin Karl
• [Amps] meter behavior   David Kirkby
• [Amps] All the recent UHF connector discussion   David Kirkby
• [Amps] All the recent UHF connector discussion   David Kirkby
• [Amps] UHF connector discussion For Dummies   David Kirkby
• [Amps] UHF connector discussion For Dummies   David Kirkby
• [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good..   David Kirkby
• [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good..   David Kirkby
• [Amps] UHF connector discussion For Dummies   David Kirkby
• [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work a...   David Kirkby
• [Amps] FS - high voltage feed through caps - 680 pF, 6 kV   David Kirkby
• [Amps] Chinese 15KV 2A rectifier modules?   Dr. David Kirkby
• [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good..   Dr. David Kirkby
• [Amps] AL-1500 Problems   Al Kozakiewicz
• [Amps] Question on soft start board location on a SB1000   Mike Krzystyniak
• [Amps] where to begin   Gustavo LU6AGV
• [Amps] where to begin   Gustavo LU6AGV
• [Amps] Measuring IMD   Colin Lamb
• [Amps] Plate Choke question   Hardy Landskov
• [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good..   Hardy Landskov
• [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE   Hardy Landskov
• [Amps] Commander HF-1250 problem   Hardy Landskov
• [Amps] Crimp connector die sizes   Hardy Landskov
• [Amps] Fw: Crimp connector die sizes   Hardy Landskov
• [Amps] GS-35b Amplifier   Nuno Lopes
• [Amps] Bleeder resistor across screen grid terminal   John Lyles
• [Amps] AL-1500 fan speed switching   Réjean Léveillé
• [Amps] AL-82 opinions   Réjean Léveillé
• [Amps] Autek WM-1 Schematic or Help   Réjean Léveillé
• [Amps] Measuring IMD   Karl-Arne Markström
• [Amps] Measuring IMD   Karl-Arne Markström
• [Amps] Measuring IMD   Karl-Arne Markström
• [Amps] Best source for Gigavac GH-1 ?   Karl-Arne Markström
• [Amps] meter behavior   Dan Michnay
• [Amps] Adhesive for plate choke?   Mike
• [Amps] Adhesive for plate choke?   Mike
• [Amps] Best source for Gigavac GH-1 ?   Mike McCarthy, W1NR
• [Amps] Measuring IMD   Manfred Mornhinweg
• [Amps] Measuring IMD   Manfred Mornhinweg
• [Amps] Remote monitoring of SSPA   Manfred Mornhinweg
• [Amps] Initial RF testing of 4CX1000A amplifier   Robert Morris
• [Amps] Best source for Gigavac GH-1 ?   Robert Morris
• [Amps] Question for the tetrode experts   N1BUG
• [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good..   N1BUG
• [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE   N1BUG
• [Amps] AL-82 opinions   Pete Smith N4ZR
• [Amps] Adhesive for plate choke?   iain macdonnell - N6ML
• [Amps] Adhesive for plate choke?   iain macdonnell - N6ML
• [Amps] Burn-in for GU84b?   Rich Hallman - N7TR
• [Amps] GIVE IT A BREAK! (Subject change from:Commander HF-1250 problem)   Steve NR4M
• [Amps] Passive grid stability calculation for a tetrode?   Markku Oksanen
• [Amps] Passive grid stability calculation for a tetrode?   Markku Oksanen
• [Amps] Passive grid stability calculation for a tetrode?   Markku Oksanen
• [Amps] Passive grid stability calculation for a tetrode?   Markku Oksanen
• [Amps] Commander HF-1250 problem   Tom Osborne
• [Amps] where to begin   Louis Parascondola
• [Amps] [RTTY] AL-1500 on RTTY   Louis Parascondola
• [Amps] Screen current problem solved!   Louis Parascondola
• [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good..**   Louis Parascondola
• [Amps] meter behavior   Louis Parascondola
• [Amps] Commander HF-1250 problem   Louis Parascondola
• [Amps] Alpha 77D amp question   Louis Parascondola
• [Amps] where to begin   Alek Petkovic
• [Amps] where to begin   Alek Petkovic
• [Amps] where to begin   Alek Petkovic
• [Amps] AL-1500 fan speed switching   Alek Petkovic
• [Amps] Ameritron AL-80A Restoration Project - need parts   Alek Petkovic
• [Amps] GS-35b Amplifier   Alek Petkovic
• [Amps] Fan control   Alf Pousar
• [Amps] Yaesu FT-2000 "TX-INH" Spec?   Bill Putney
• [Amps] How much power through a BNC connector?   Bill Putney
• [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE   Pete Raymond
• [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE   Pete Raymond
• [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE   Pete Raymond
• [Amps] GIVE IT A BREAK! (Subject change from:Commander HF-1250 problem)   Doug Renwick
• [Amps] Atricle on use and misuse of toroids   Stu Ritter
• [Amps] Initial RF testing of 4CX1000A amplifier   Vic Rosenthal
• [Amps] TL922 on 12/17   Vic Rosenthal
• [Amps] [amps] West Coast Handbook   Don Ruokonen
• [Amps] Making a broadband transformer   Saandy
• [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE   WK1W Ivan Shapiro
• [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE   WK1W Ivan Shapiro
• [Amps] Ameritron AL-80A Restoration Project - need parts   Jack C. Shutt
• [Amps] Ameritron AL-80A Restoration Project - need parts   Jack C. Shutt
• [Amps] Chinese 4CX1000A from Alpha   Gary Smith
• [Amps] Commander HF-1250 problem   Gary Smith
• [Amps] FW: Fan sounds like F-15   Gary Smith
• [Amps] Measuring IMD   Richard Solomon
• [Amps] West Coast Handbook   Richard Solomon
• [Amps] [amps] West Coast Handbook   Richard Solomon
• [Amps] where to begin   Richard Solomon
• [Amps] Solid State Amplifiers   Richard Solomon
• [Amps] Measuring IMD   Steef
• [Amps] GS23B Plate load resistance for HF   Jim Thomson
• [Amps]  GS23B Plate load resistance for HF   Jim Thomson
• [Amps] Large Variac controlling HV power supply   Jim Thomson
• [Amps] Measuring IMD   Jim Thomson
• [Amps] Looking for picture of SB220 interlock switch   Jim Thomson
• [Amps] Best source for Gigavac GH-1 ?   Jim Thomson
• [Amps] Discrepencies in Pi-net calculators   Jim Thomson
• [Amps] Measuring IMD   Dave Trainor
• [Amps] FW: Fan sounds like F-15   Dave Trainor
• [Amps] Measuring IMD   Bill Turner
• [Amps] Measuring IMD   Bill Turner
• [Amps] Making a broadband transformer   Bill Turner
• [Amps] Making a broadband transformer   Bill Turner
• [Amps] Initial RF testing of 4CX1000A amplifier   Bill Turner
• [Amps] Initial RF testing of 4CX1000A amplifier   Bill Turner
• [Amps] Initial RF testing of 4CX1000A amplifier   Bill Turner
• [Amps] Making a broadband transformer   Bill Turner
• [Amps] AL-82 opinions   Bill Turner
• [Amps] Initial RF testing of 4CX1000A amplifier   Bill Turner
• [Amps] AL-82 opinions   Bill Turner
• [Amps] where to begin   Bill Turner
• [Amps] AL-82 opinions   Bill Turner
• [Amps] [RTTY] AL-1500 on RTTY   Bill Turner
• [Amps] Question on soft start board location on a SB1000   Bill Turner
• [Amps] Question for the tetrode experts   Bill Turner
• [Amps] The missing linka   Bill Turner
• [Amps] Autek WM-1 Schematic or Help   Bill Turner
• [Amps] Best source for Gigavac GH-1 ?   Bill Turner
• [Amps] UHF Connectors   Bill Turner
• [Amps] UHF Connectors   Bill Turner
• [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE   Bill Turner
• [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE   Bill Turner
• [Amps] Passive grid stability calculation for a tetrode?   Bill Turner
• [Amps] Atricle on use and misuse of toroids   Bill Turner
• [Amps] Atricle on use and misuse of toroids   Bill Turner
• [Amps] Commander HF-1250 problem   Bill Turner
• [Amps] Commander HF-1250 problem   Bill Turner
• [Amps] Commander HF-1250 problem   Bill Turner
• [Amps] Commander HF-1250 problem   Bill Turner
• [Amps] GIVE IT A BREAK! (Subject change from:Commander HF-1250 problem)   Bill Turner
• [Amps] Bleeder resistor across screen grid terminal   Bill Turner
• [Amps] Adhesive for plate choke?   Bill Turner
• [Amps] Measuring IMD   Leigh Turner
• [Amps] Plate Choke question   Leigh Turner
• [Amps] Burn-in for GU84b?   Leigh Turner
• [Amps] Chinese 4CX1000A from Alpha   Vic, K2VCO
• [Amps] Measuring IMD   Peter Voelpel
• [Amps] Initial RF testing of 4CX1000A amplifier   Peter Voelpel
• [Amps] Initial RF testing of 4CX1000A amplifier   Peter Voelpel
• [Amps] Question for the tetrode experts   Peter Voelpel
• [Amps] Screen current problem solved!   Peter Voelpel
• [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good..   Peter Voelpel
• [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good..   Peter Voelpel
• [Amps] UHF Connectors   Peter Voelpel
• [Amps] Discrepencies in Pi-net calculators   Peter Voelpel
• [Amps] W7RY QSK Parts Back on EBay   Jim W7RY
• [Amps] Measuring IMD   Jim W7RY
• [Amps] Chinese 15KV 2A rectifier modules?   Jim W7RY
• [Amps] [amps] West Coast Handbook   Jim W7RY
• [Amps] Question on soft start board location on a SB1000   Jim W7RY
• [Amps] Yaesu FT-2000 "TX-INH" Spec?   Jim W7RY
• [Amps] Question for the tetrode experts   Jim W7RY
• [Amps] AL-1500 fan speed switching   Jim W7RY
• [Amps] Question for the tetrode experts   Jim W7RY
• [Amps] Alpha chimneys   Jim W7RY
• [Amps] Autek WM-1 Schematic or Help   Jim W7RY
• [Amps] Autek WM-1 Schematic or Help   Jim W7RY
• [Amps] Autek WM-1 Schematic or Help   Jim W7RY
• [Amps] Autek WM-1 Schematic or Help   Jim W7RY
• [Amps] Best source for Gigavac GH-1 ?   Jim W7RY
• [Amps] Best source for Gigavac GH-1 ?   Jim W7RY
• [Amps] Small vertical ceramic slug type trimmer   Jim W7RY
• [Amps] Best source for Gigavac GH-1 ?   Jim W7RY
• [Amps] UHF connector discussion For Dummies   Jim W7RY
• [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good..   Jim W7RY
• [Amps] Making a broadband transformer   Mike Waters
• [Amps] Making a broadband transformer   Mike Waters
• [Amps] Discrepencies in Pi-net calculators   Mike Waters
• [Amps] Initial RF testing of 4CX1000A amplifier   Ian White
• [Amps] Initial RF testing of 4CX1000A amplifier   Ian White
• [Amps] Initial RF testing of 4CX1000A amplifier   Ian White
• [Amps] Screen current problem solved!   Ian White
• [Amps] UHF Connectors   Ian White
• [Amps] Replacement Fan Motor for Drake L-4B   Russ Williams
• [Amps] Measuring IMD   Chris Wilson
• [Amps] Ameritron AL-80A Restoration Project - need parts   ZL2AAA
• [Amps] UHF Connectors   Glen Zook
• [Amps] UHF connector discussion For Dummies   Glen Zook
• [Amps] Initial RF testing of 4CX1000A amplifier   TexasRF at aol.com
• [Amps] Initial RF testing of 4CX1000A amplifier   TexasRF at aol.com
• [Amps] Question for the tetrode experts   TexasRF at aol.com
• [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work a...   TexasRF at aol.com
• [Amps] UHF connector discussion For Dummies   TexasRF at aol.com
• [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work a...   TexasRF at aol.com
• [Amps] Passive grid stability calculation for a tetrode?   TexasRF at aol.com
• [Amps] Large Variac controlling HV power supply   wt8r at aol.com
• [Amps] NEW 3CX1500A7/8877 FOR SALE   wt8r at aol.com
• [Amps] Adhesive for plate choke?   L L bahr
• [Amps]  GS23B Plate load resistance for HF   peter chadwick
• [Amps] Measuring IMD   peter chadwick
• [Amps] Measuring IMD   peter chadwick
• [Amps] Measuring IMD   peter chadwick
• [Amps] Measuring IMD   peter chadwick
• [Amps] Chinese 15KV 2A rectifier modules?   peter chadwick
• [Amps] Question for the tetrode experts   peter chadwick
• [Amps] Question for the tetrode experts   peter chadwick
• [Amps] Autek WM-1 Schematic or Help   peter chadwick
• [Amps] Plate Choke question   peter chadwick
• [Amps] Plate Choke question   peter chadwick
• [Amps] Best source for Gigavac GH-1 ?   peter chadwick
• [Amps] Plate Choke question   peter chadwick
• [Amps] Plate Choke question   peter chadwick
• [Amps]  Measuring IMD   peter chadwick
• [Amps] Best source for Gigavac GH-1 ?   peter chadwick
• [Amps] UHF Connectors   peter chadwick
• [Amps] UHF Connectors   peter chadwick
• [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good..   peter chadwick
• [Amps] UHF Connectors   peter chadwick
• [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good..   peter chadwick
• [Amps] UHF connector discussion For Dummies   peter chadwick
• [Amps] Passive grid stability calculation for a tetrode?   peter chadwick
• [Amps] Passive grid stability calculation for a tetrode?   peter chadwick
• [Amps] Passive grid stability calculation for a tetrode?   peter chadwick
• [Amps] Passive grid stability calculation for a tetrode?   peter chadwick
• [Amps] Commander HF-1250 problem   peter chadwick
• [Amps] Discrepencies in Pi-net calculators   peter chadwick
• [Amps] Adhesive for plate choke?   peter chadwick
• [Amps] [AMPS] Commander HF-1250 problem   art421 at cox.net
• [Amps] AL-1500 Problems   rick darwicki
• [Amps] AL-1500 fan speed switching   rick darwicki
• [Amps] AL-1500 thanks to all   rick darwicki
• [Amps] Nye 3 KW antenna tuner   rick darwicki
• [Amps] Small vertical ceramic slug type trimmer   rick darwicki
• [Amps] Chimney solved - now what about SSB/CW switch?   rick darwicki
• [Amps] AL-1500 PROIII SteppIR   rick darwicki
• [Amps] Commander HF-1250 problem   doug ferguson
• [Amps] Commander HF-1250 problem   doug ferguson
• [Amps] Commander HF-1250 problem   doug ferguson
• [Amps] Commander HF-1250 problem   doug ferguson
• [Amps] Commander HF-1250 problem   doug ferguson
• [Amps] Large Variac controlling HV power supply   donroden at hiwaay.net
• [Amps] Looking for picture of SB220 interlock switch   donroden at hiwaay.net
• [Amps] Question for the tetrode experts   donroden at hiwaay.net
• [Amps] Looking for picture of SB220 interlock switch   donroden at hiwaay.net
• [Amps] Remote monitoring of SSPA   donroden at hiwaay.net
• [Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE   donroden at hiwaay.net
• [Amps] UHF connector discussion For Dummies   donroden at hiwaay.net
• [Amps] Passive grid stability calculation for a tetrode?   donroden at hiwaay.net
• [Amps] GIVE IT A BREAK! (Subject change from:Commander HF-1250 problem)   donroden at hiwaay.net
• [Amps] [amps] West Coast Handbook   k7fm
• [Amps] UHF Connectors   qrv at kd4e.com
• [Amps] GIVE IT A BREAK! (Subject change from:Commander HF-1250 problem)   mgb
• [Amps] GS-35b Amplifier   jeff millar
• [Amps] Chinese FU-724F   gdaught6 at stanford.edu
• [Amps] Remote monitoring of SSPA   dsolberg at wi.rr.com

Last message date: Sat Nov 30 18:44:02 EST 2013
Archived on: Sun Dec 1 09:06:15 EST 2013

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...