[Amps] Autek WM-1 Schematic or Help

[Jim W7RY]

BTW the manual has a bit of a schematic, but the choke is not shown.

Thanks
73
Jim W7RY

On 11/8/2013 9:24 PM, Jim W7RY wrote:
> I have a problem with an Autek WM1 measring the output of my 
> amplifier. :)
>
> Does anyone have a schematic for the Autek WM-1? A Google search found 
> nothing.
>
> Mine looks like it has a wiring error. The center tap of the sens 
> transformer is not hooked to anything.. Also there is a small choke on 
> the output connector, then that goes to 2ea 10 PF caps in series, then 
> to the board. The small choke is smoked/burned.
>
> Any idea what the value of the choke is? Anyone have a picture of the 
> internal of the sensor module?
>
> Thanks
> 73
> Jim W7RY
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>