[Amps] Autek WM-1 Schematic or Help

[Jim W7RY]

Thanks all for sending pictures and other stuff!

Got it all back to working and calibrated.
73
Jim W7RY


On 11/8/2013 9:36 PM, Jim W7RY wrote:
> BTW the manual has a bit of a schematic, but the choke is not shown.
>
> Thanks
> 73
> Jim W7RY
>
> On 11/8/2013 9:24 PM, Jim W7RY wrote:
>> I have a problem with an Autek WM1 measring the output of my 
>> amplifier. :)
>>
>> Does anyone have a schematic for the Autek WM-1? A Google search 
>> found nothing.
>>
>> Mine looks like it has a wiring error. The center tap of the sens 
>> transformer is not hooked to anything.. Also there is a small choke 
>> on the output connector, then that goes to 2ea 10 PF caps in series, 
>> then to the board. The small choke is smoked/burned.
>>
>> Any idea what the value of the choke is? Anyone have a picture of the 
>> internal of the sensor module?
>>
>> Thanks
>> 73
>> Jim W7RY
>>
>> _______________________________________________
>> Amps mailing list
>> Amps at contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
>>
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>