[Amps] UHF Connectors & Crimpers: WHICH/WHAT SOURCE

[Pete Raymond]

Someone spoke about crimpers and connectors from RF Industries. I've 
been on their web page and they have a very large selection of 
commercial grade connectors and Kits that come complete with the tool 
and die.  They also sell the crimping tool separately for $67.56 and a 
die for RG8, 213, 214, and a Belden coax that I did not record in my 
notes which one it was, anyway that die sells for $32.29.  They also 
sell a kit with the tool and about 6 different dies for $268.00

They have a very large selection of connectors and their UHF connector 
sells for 2.51 each.  I was also advised that if I went to one of their 
distributors the price should be a bit less than what they sell them for.

Hope this helps.
73 Pete N4KW



On 11/13/2013 1:21 PM, Paul Christensen wrote:
>> I would like that have info too. I spend WAY too much time soldering 
>> PL-259s. Also, what about stripping the cable for installing the 
>> crimp PL-259s? is there a tool for that? If so, how 
>> necessary/important is it?
>
> Pretty important.  I use several Paladin 2 and 3 level strippers. 
> Check, and then re-check the stripper model against the coax type and 
> crimp connector used.
>
> Paul, W9AC
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>