[Amps] Crimp connector die sizes

[Roger (K8RI)]

On 11/24/2013 1:26 PM, Hardy Landskov wrote:
> All,
> Here's what I could garner. These are just Amphenol crimp connectors straight out of the Mouser catalog so it does not include overseas stuff or other American vendors.
>

9913 is an RG8 size cable.  0.429, not 0.118
All the LMR-600 tools I've seen are single purpose.
Mine in a lever action that slides the one side of the die horizontally 
which is part of the tool

73

Roger (K8RI)
> P/N                Coax                     Die size(inches)
>
> 172128   LMR-100, RG174,              0.128
>                RG188A/U, RG316U
>
> 172171   RG316/U double shield       0.151
>
> 171142   LMR-400                           0.429
>
> 171100   RG59/U, RG142                 0.213
>
> 172214   LMR-200, LMR-240             0.213
>                RG8X
>
> 172135   Belden 7808A                     0.255
>
> 172202   LMR-600                            0.610
>
> 172102   RG-8, RG-213                    0.429
>
> 172166   RG-214, LMR-400               0.429
>
> 172101   RG-59/U                             0.255
>
> 172102H243   LMR-400/B9913           0.429
>
>       ?       Belden  9913                       0.118
>
> Notes
> 1)  I did not locate a crimp tool for LMR-600.
> 2)  I did not find a connector for 9913 but I have a note that 0.118 is the die size.
> 3)  Add 523- in front of the Amphenol P/N to get the Mouser number.
> 4)  Notice that Amphenol makes different connectors for the same coax, RG-59 for example.
>       I have no explanation for this.
>
>
> I actually made an Excel spreadsheet but I guess this reflector does not allow attachments.
>
> 73 Hardy N7RT
>
>
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>