[Amps] Autek WM-1 Schematic or Help

[Réjean Léveillé]

Hi
Mine shows at the toroid RF out SO-239, 1x 1.2 uH connected to 2x 10pF/1kv
capacitor in series with this 1.2uF.

Rejean
VA2AM

-----Message d'origine-----
De : Amps [mailto:amps-bounces at contesting.com] De la part de Jim W7RY
Envoyé : November 9, 2013 12:24 AM
À : amps at contesting.com
Objet : [Amps] Autek WM-1 Schematic or Help

I have a problem with an Autek WM1 measring the output of my amplifier. :)

Does anyone have a schematic for the Autek WM-1? A Google search found
nothing.

Mine looks like it has a wireing error. The center tap of the sens
transformer is not hooked to anything.. Also there is a small choke on the
output connector, then that goes to 2ea 10 PF caps in series, then to the
board. The small choke is smoked/burned.

Any idea what the value of the choke is? Anyone have a picture of the
internal of the sensor module?

Thanks
73
Jim W7RY

_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps