[Amps] Fw: Crimp connector die sizes

[Hardy Landskov]

All
Please correct the 9913  0.118 inch dimension as it is the crimp size for the center pin. The shield should be 0.429 inches.
I will do the correction in this email. I have learned too there is a tool for LMR-600 but it made exclusively for that size coax. Contact K8RI for the info.
73 Hardy

----- Original Message ----- 
From: Hardy Landskov 
To: amps at contesting.com 
Sent: Sunday, November 24, 2013 11:26 AM
Subject: Crimp connector die sizes


All,
Here's what I could garner. These are just Amphenol crimp connectors straight out of the Mouser catalog so it does not include overseas stuff or other American vendors.

P/N                Coax                     Die size(inches)

172128   LMR-100, RG174,              0.128
              RG188A/U, RG316U

172171   RG316/U double shield       0.151

171142   LMR-400                           0.429

171100   RG59/U, RG142                 0.213

172214   LMR-200, LMR-240             0.213
              RG8X

172135   Belden 7808A                     0.255

172202   LMR-600                            0.610

172102   RG-8, RG-213                    0.429

172166   RG-214, LMR-400               0.429

172101   RG-59/U                             0.255

172102H243   LMR-400/B9913           0.429

     ?       Belden  9913                       0.429

Notes
1)  I did not locate a crimp tool for LMR-600.
2)  9913 is the same as LMR-400
3)  Add 523- in front of the Amphenol P/N to get the Mouser number.
4)  Notice that Amphenol makes different connectors for the same coax, RG-59 for example.
     I have no explanation for this.


I actually made an Excel spreadsheet but I guess this reflector does not allow attachments.

73 Hardy N7RT