[Amps] UHF Connectors

[Bill Turner]

ORIGINAL MESSAGE:          (may be snipped)

On Tue, 12 Nov 2013 22:46:58 -0000, Ian wrote:

>We know that the original PL259 is an excellent connector if it is
>assembled properly, but the original design allows so many different
>ways of doing it badly - so much so that badly assembled PL259s have
>become one of the most common causes of RFI. 

REPLY:

I've given up on the traditional solder-type PL-259s. Now I use the crimp on
type and have never had a failure. The crimper is expensive but well worth
the time and hassle saved.  I got both crimper and connectors on eBay. There
are many sizes so be sure you get the right ones. 

73, Bill W6WRT