[Amps] AL-1500 PROIII SteppIR

[rick darwicki]

Using a PRO III with a computer and keyer, the AL-1500 gets engaged in many ways, I.E by the internal memories in the PRO III, by the PRO III key jack, by the PTT and keying lines at the ACC socket etc.

The N8LP lockout will protect the antenna by disabling the amp if I put it in series with the relay line (not recommended, per Tom, W8JI) but that blows the QSK fuses.

I seem to remember adding jacks to my AL-80B so the N8LP would break the STBY/OPR switch.

With keydown at full power out, if the N8LP effectively move the STBY/OPR switch to STBY would I blow the fuses in the QSK board or otherwise cause smoke to leak out of something?

Thanks, 

Rick, N6PE
======================================= 
The only difference between a rut and a grave is the depth.

Website:  http://www.qsl.net/n6pe/index.html
 
eBay Store:  http://stores.ebay.com/N6PE-Radio-Tubes