[Amps] Plate Choke question

[Carl]

A 1000pf is fine for those frequencies and nothing will get thru the 
Nichrome Nibbler and the last cap.

Carl
KM1H


----- Original Message ----- 
From: "Steve Flood" <kk7uv at bresnan.net>
To: <amps at contesting.com>
Sent: Sunday, November 10, 2013 1:47 PM
Subject: Re: [Amps] Plate Choke question


> >I much prefer tossing the so called VHF choke and replacing with a
> wirewound glitch resistor. The WW has inductance and serves a dual 
>  >purpose
> wheras Ive seen a few amps where the "VHF" choke cause problems.
>
>
>
>
>
> Thanks for the advice.  I'll wind a 50uH choke and use a 10-ohm 50-watt
> glitch, each end bypassed with .0047 caps (idea gleaned from an earlier
> topic), and perhaps an added 500pF bypass doorknob between glitch and 
> choke
> (unless those bypass values could be optimized for 10-20m also?).  I have
> some ceramic/steatite standoffs that could serve as a choke form.
>
>
>
> Steve, KK7UV
>
>
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1432 / Virus Database: 3222/6324 - Release Date: 11/10/13
>