[Amps] Henry 2002

[Mike & Becca Krzystyniak]

Hi Joe,

    My Henry 2002A used a Guardian 1365PC Antenna Relay, used in many Henry
Amplifiers.

    Mine had solder conenctions made with wire stressed, and one lead pulled
away from ground and another the joint cracked and made something like a
cold solder joint, but like your it pass RF just not signals...

    Good luck with the search.

73  Mike  K9MK


-----Original Message-----
From: Amps [mailto:amps-bounces at contesting.com] On Behalf Of Joe Barnes
Sent: Tuesday, October 22, 2013 7:55 PM
To: Amps at contesting.com
Subject: [Amps] Henry 2002

I have a Henry 2002 here and it will make full power in operate mode and
pass all the drive in standby but in standby mode it seems to put about 30
db of attenuation in the receiver line. Does anyone have an idea what might
be up? If I am reading the schematic right it uses a RJ1A vacuum relay.  

Thank you, 

Joe N4JBK
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps