[Amps] Filter capacitors
Carl
km1h at jeremy.mv.com
Tue Apr 22 17:52:27 EDT 2014
It all depends on what they are used for....
If its capacitor input followed by a choke the output will be higher,
especially at low or no load. Sometimes tube rectifiers or something else
will complain. For SS the inrush may hurt wimpy diodes.
If choke input the output B+ wont raise much as the bleeder current holds it
down, ripple will be reduced and regulation better.
If its just a simple C only PS the no to full load regulation will be better
and ripple less; more inrush current.
Carl
KM1H
----- Original Message -----
From: "Robert Logan via Amps" <amps at contesting.com>
To: <amps at contesting.com>
Sent: Tuesday, April 22, 2014 5:39 PM
Subject: [Amps] Filter capacitors
> Are there any adverse effects to doubling the capacitance (leaving voltage
> ratings at spec) of an electrolytic in a 300 or an 800 voltage power
> supply? I have new ones on hand to replace old, leaky ones. Thanks for
> any advice. Bob NZ5A
>
> Sent from my iPhone
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2014.0.4569 / Virus Database: 3882/7376 - Release Date: 04/22/14
>
More information about the Amps
mailing list