[Amps] Auto tune conversion using stepper motors?
peter chadwick
g8on at fsmail.net
Sun Apr 27 04:46:01 EDT 2014
Being somewhat cynical, I would rather rely on a system with microswitches to detect the end points rather than electronics - far less to go wrong. It's not difficult to do.
73
Peter G3RZP
========================================
Message Received: Apr 27 2014, 09:10 AM
From: "Markku Oksanen" <ww1c at outlook.com>
To: "Colin Lamb" <k7fm at teleport.com>, "Amps" <amps at contesting.com>
Cc:
Subject: Re: [Amps] Auto tune conversion using stepper motors?
Hi
Thanks for the ideas.
Does anybody have a good idea how to find the "zero point" on vacuum cap without adding a potentiometer for position feedback? I was thinking about reflective optical sensors and setting them up so that when the cap opens up totally, the gap between the sides of the capacitor are detected as a drop of reflection . These sensors are really inexpensive, only thing is how to position them correctly and accurately.
Markku
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps
More information about the Amps
mailing list