[Amps] Old Moto RF Decks

Carl km1h at jeremy.qozzy.com
Mon Dec 1 15:43:24 EST 2014


SSB IMD goes up rapidly above 300W per tube even with simplistic screen 
regulation. Be a good neighbor on the bands with those rather aged and 
obsolete designs (1947) that predate widespread SSB use.

Collins rated their 1960 AN/URC-32 at 500W with a pair of lower IMD 
4CX250R's at 2000V while Eimac rated them to 2500V with poor IMD specs. 
Those transceivers, at 6' tall, ran fine without clobbering other close 
channel USN users.

Carl
KM1H



----- Original Message ----- 
From: "John Kinney" <J.Kinney at freescale.com>
To: <amps at contesting.com>
Sent: Monday, December 01, 2014 1:52 PM
Subject: Re: [Amps] Old Moto RF Decks


> Date: Sun, 30 Nov 2014 16:26:30 -0500
> From: "Col. Paul E. Cater" <paulecater at gmail.com>
> Subject: [Amps] Old Moto RF Decks
>
> I have some of the old Motorola (Micor?) RF decks. I have both the VHF & 
> UHF types. The 2 meter is running a pair of the 8560A tubes. I can't 
> recall the single tube in the UHF decks.
>
> The question being is there any market for these things now-a-days? I had 
> intended to build up a PS for them eventually. But, got hooked on playing 
> with SSHPAs.
>
> Paul
> WD8OSU
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>
> Hi Paul and the group,
>
> I have several of the single tube (high 2m band), dual tube (high 2m 
> band), dual tube (6m band) RF decks.  I created a PS to power the RF decks 
> and converted a couple of the single tube and dual tube units to 2 meters. 
> The dual tube units put out about 750 Watts with about 5 watts drive.  The 
> single tube units will get you about 400 Watts with 3 Watts drive.  I had 
> a UHF unit (single tube), but used it for spare parts to fix others.
>
> I liked the fact that I could run 700+ watts on 2m SSB with no fan noise. 
> Just built it into a rack with the heat sinks sticking out the back...
>
> Tubes are by far the hardest to get a hold of now, for me at least.  Maybe 
> I'm too cheap......
>
> John Kinney
> Tempe, Arizona
> KA7CVJ
>
>
>
>
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2015.0.5577 / Virus Database: 4223/8663 - Release Date: 12/01/14
> 



More information about the Amps mailing list