[Amps] Drake

[Paul Baldock]

As in most Grounded Grid Amplifiers the Drake 
requires that B- is allowed to float from ground. 
If your B- is connected directly to ground 
(chassis) the metering system will not work. You 
need to check the schematic for the OEM supply and wire accordingly.

- Paul
- KW7Y



At 12:59 AM 2/17/2014, thomas haglund wrote:
>Hello
>
>I have a drake l4 hf amp.i have built a external 
>power supply that i connected to the hv miller
>In drake amp.and a still have orginal ps 
>connected to 220 line to amp to get power to
>Amp for 5v to tubes and so on.hv line from orginal ps has been disconnected.
>Now a small problem,grid current and anod current meters dont work,what has
>I missed?,
>
>Best regads
>
>Thomas
>
>
>Skickat från min iPad 
>_______________________________________________ 
>Amps mailing list Amps at contesting.com 
>http://lists.contesting.com/mailman/listinfo/amps