[Amps] pre-distortion

Philip Townsend Lontz philji at mac.com
Sat Oct 18 23:43:44 EDT 2014


Warren, this wonderful! Thank you!
You have set my brain racing!


Don't learn to code... Learn to think!


> On Oct 18, 2014, at 9:29 PM, Warren C. Pratt <warren at wpratt.com> wrote:
> 
> Greetings,
> 
> I sometimes monitor this list and I see that the topic of pre-distortion is appearing recently in several posts.  I wrote the pre-distortion software that was released a few months ago as part of the openHPSDR (open High Performance Software Defined Radio) program.  I'll offer just a few observations:
> 
> ** It seems to me that it's probably much easier to optimally implement pre-distortion in a DDC/DUC (digital up-conversion / digital down-conversion) software defined radio than in other radios.  There are simply very few places that errors can creep into the required processing.  The required precision and accuracy increase exponentially as the desired reduction in IMD increases. So, having few error sources and the benefit of double-precision floating point become important.
> 
> ** 50V LDMOS amplifiers are probably the "most correctable" solid state amps.  Tube type amps also correct very well.  13.8V amps are more difficult due to "memory effects."
> 
> ** No problem to correct an entire amplifier chain, at legal limit. No extra hardware or software is required.  One just feeds back a sample of the output from the last stage to calculate the correction.
> 
> ** You cannot successfully correct by pre-distorting the MIC input to a radio UNLESS you have VERY wide bandwidth from the MIC through the entire transmitter. The IMD frequencies that you want to correct must be within the bandpass of the correction path.
> 
> At Ham Radio Friedrichshafen this past June, I gave a talk (approx. 30 min.) on the openHPSDR solution for pre-distortion.  It's posted on the openHPSDR web site.  If any are interested, here's a link:
> 
> "*Warren Pratt,*NR0V, 2014.Digital Predistortion linearizes RF amplifiers <http://video.openhpsdr.org/HRF2014/PureSignal1.2.mp4>(MP4)"
> 
> This link is posted on the <openHPSDR.org> website on the Publications page.   The video includes a few examples of amplifiers where this technology has been applied.
> 
> I hope this helps explain a little more about this technology and sparks more interest in finding ways to reduce IMD!
> 
> 73,
> Warren  NR0V
> 
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps


More information about the Amps mailing list