[Amps] MLA2500B on WARC bands

[Carl]

Remove 4T from the top of the plate choke to remove the 12M resonance to the 
CB band.

Remember that there is no tuned input in that amp so some rigs may fold back 
power.

Also keeping the grid current low is VERY important to long life as new 
8875's can run $1100-1300 a pair if you can find them. KNOWN GOOD ones are 
in the $500-800/pair range.


----- Original Message ----- 
From: "Kathy Bookmiller via Amps" <amps at contesting.com>
To: <amps at contesting.com>
Sent: Sunday, October 19, 2014 4:36 PM
Subject: [Amps] MLA2500B on WARC bands


>
> Hello,
> A friend offered to sell me his Dentron amp. I had one like it years ago, 
> but before the WARC bands came about. My question is whether it can be 
> used on the WARC bands? With my current old reliable SB200, one can set 
> the band switch for the next higher band and it works fine. Has anyone 
> done the same with the MLA2500B?  I'm mainly interested in getting on 160 
> and I figure that this would be easier than trying to modify the SB200 to 
> use on 160.  But I have developed a real affection for these "new" bands 
> that I never got to try before getting a more modern rig and wouldn't want 
> to lose WARC to gain 160
> 73,
> Kathy, W2NK
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2015.0.5315 / Virus Database: 4181/8416 - Release Date: 10/19/14
>