[Amps] TRANS WORLD TW500A-RM

Steve Thompson g8gsq72 at gmail.com
Wed Dec 21 16:59:42 EST 2016


I'm sure that somewhere I have the user manual for the TW500 
mobile version. If I can find it and get any spare time over the 
holiday I'll run it through the scanner.

In answer to Emile's original question - I imagine the main part 
of the 'FSK option' is a LOT of extra cooling.

Steve

> For any that are interested I sent a manual and some information attachment
> to Emile that covers my TW1000A that is basically two TW500A amplifiers  in
> one cabinet with input and output combiners. Transworld was sold to Datron
> World Communications some years ago and was still supporting and servicing
> Transworld amplifiers when they did a repair on mine in 2009.  I do not have
> a manual for the TW500A and suggested he try Datron but I hope someone else
> here can help him since what I sent him is similar but not exactly what her
> has.  They are great amplifiers and were used in US Consulates all over the
> world and have full coverage from 1.8 to 30 Mhz all solid state.
> Dave W7VM
>
> -----Original Message-----
> From: Amps [mailto:amps-bounces at contesting.com] On Behalf Of Emile Venter
> Sent: Wednesday, December 21, 2016 1:37 AM
> To: amps at contesting.com
> Subject: [Amps] TRANS WORLD TW500A-RM
>
> Hi
>
>
>
> I have recently acquired an old Trans World TW500A-RM solid state amplifier.
>
>
>
> This is the rack mount version of this 500W amplifier.
>
>
>
> It is a very basic amplifier with absolutely no fancy electronics.  The rack
> mount version was made to only switch bands via a remote switch.  However,
> one of the previous owners installed a band selector switch on the front
> panel.
>
>
>
> Very little information on this amplifier is available on the Internet.
>
>
>
> In the operator's and technical manual I found on the Internet, it is
> mentioned that the "FSK Option" should be installed for high duty cycle
> operation such as FSK and CW.  I cannot find any information on this "FSK
> Option".  How would I know if this option is installed in the amplifier I
> have?
>
>
>
> Also, if anyone out there can point me in the right direction to find more
> information on this amplifier, I would really appreciate your help.


More information about the Amps mailing list