[Amps] SB-220 HV meter on zero

[mikflathead at aol.com]

 You can test the meter with a ohm meter. Disconnect one side and check for continuity. Mike

 

 

-----Original Message-----
From: Catherine James <catherine.james at att.net>
To: amps <amps at contesting.com>
Sent: Tue, Nov 1, 2016 6:09 pm
Subject: Re: [Amps] SB-220 HV meter on zero

OK, found schematics (thanks Bob W1ICW). Looking at the glorified voltage divider, I'm guessing it's just an open resistor on the meter board. I'll have a closer look at it later this week. 

Hoping the meter coil isn't bad...

Cathy

_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps