[Amps] 3 Phase XFMR

[alexeban]

Same thing happened to me, but with an offline converter (28V,  1500W, 3 phase, 110 V per phase ).
The darned thing works beautifully in feeding four 300W  rms SSA's.  basically no reason whi it shouln't......


Sent from Samsung Mobile.

<div>-------- Original message --------</div><div>From: Mark - AA6DX <eureka at suddenlink.net> </div><div>Date:02/11/2016  18:58  (GMT+02:00) </div><div>To: amps at contesting.com </div><div>Cc:  </div><div>Subject: [Amps] 3 Phase XFMR </div><div>
</div>Was the story on using a 3 Phase on single phase ... back in the 60s, a local 5000 watt AM daytimer had its xfmr burn out.  It was given to me, I was figuring I could get a lot of wire out of it
as it had the three separate windings.  Come to find out, only one winding was shorted.  After research and finding all kinds of ideas, I simply connected the two good windings in series and
fed them with a 230 VAC “extension cord” from our dryer feed...worky worky!  I put that big chunk of iron in the bottom of my 6’ rack for the  HB 4-1000 I was building.  Ran it for years, and was still 
running  FB when I parted with the amp because move across the USA.  Don’t know where it abides now--HIHI.
73  Mark AA6DX  Eureka, CA                                                                                                                                                      
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps