[Amps] Ham Tests, was Price per Watt Conversation

Charles H k4vud at hotmail.com
Wed Apr 26 04:36:54 EDT 2017


I vote for more questions about proper on air operations, when to call, etc., and ham law stuff.  Get the appliance op to where he is bearable on air.

Charly


________________________________
From: Amps <amps-bounces at contesting.com> on behalf of Roger (K8RI) <k8ri at rogerhalstead.com>
Sent: Wednesday, April 26, 2017 8:28 AM
To: amps at contesting.com
Subject: Re: [Amps] Price per Watt Conversation

Unfortunately, the exams are going the other way with very little
required in the was of technology ans theory. They have dumbed down the
exams to where, I think my Novice test had more theory than any of the
present exams.  Now the ARRL thinks we need an even easier, entrance
level class. Well, the East and West coasts are liberal havens.

We don't need an easier class! As Manfred said, we need one that
requires some technical knowledge. Ain't gonna happen in today's social
climate.

As for ALC, I only know of one manufacturer that has the output power
controlled by ALC with the overshoot.

My transceiver runs 200 out and backed off to drive a high gain tetrode
has no overshoot. I've received a lot of compliments on the signal quality.

Referring to the clean commercial rigs and the ham rigs that let the
user tailor the signal into pure trash.  There seems to be a number of
hams that like to add 100 Hz on the bottom of the audio for a more
"natural" sound, then complain when calling stations are off their
frequency by 100 Hz. I ran an experiment with one such station with him
randomly adding and removing the 100 Hz. Even then, he couldn't
understand why I was moving 100 Hz with each change and this was an old
timer.

I like to look inside, but touch nothing. Many of today's rigs require
some sophisticated equipment to properly align.  They even require a set
sequence for setting up the audio, that if not followed in order, can
leave the transmitted signal really bad. The companies didn't do ham
radio any favors by making so many parameters accessible to the user!
I've worked with digital for years and know enough that I realize, there
is no way I can repair one of the top end rigs with the possible
exception of the displays, or possibly final module.

73

Roger (K8RI)


On 4/25/2017 4:37 PM, Manfred Mornhinweg wrote:
>
> Some hams go another step further, take the cover off their radios and
> defeat the ALC. That goes a good way toward deflecting the needles
> even further. And toward splattering all over the band and then some,
> of course.
>
> Hams should be asked to pass a test, both about technical knowledge
> and mental sanity, before being allowed to operate radios that have
> external controls for mic gain and compression level. Those who
> haven't passed that test should only operate radios that don't have
> these controls, and only operate them with the stock mikes. And the
> covers of their radios should be welded shut, just in case! :-)
>
>
> Joe,
>
> just a small correction:
>
> > The PA must be over driven in order to produce any ALC!
>
> That depends on how it's implemented. An ALC that requires overdriving
> is a badly designed ALC. In solid state transceivers the ALC signal is
> usually derived from a comparator that starts giving an output when
> either the power output reaches a certain level, or the reflected
> power does so. If this comparator is properly adjusted so that it
> starts giving an output a little before the PA is overdriven, then the
> ALC prevents overdriving. Of course if a monkey with a screwdriver
> fiddles with that internal adjustment and sets it above the overload
> level, the ALC can no longer do its job of preventing overdrive.


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps
Amps Reflector - Contesting.com Ham Radio Mailing Lists<http://lists.contesting.com/mailman/listinfo/amps>
lists.contesting.com
Welcome to the Amplifier mailing list! This list is intended for the exchange of information on HAM RADIO Amplifiers related topics ONLY. Our goal is to keep ...




More information about the Amps mailing list