[Amps] Ten-Tec Titan 10 Meter Input SWR

[Bill Turner]

------------ ORIGINAL MESSAGE ------------(may be snipped)

On Sun, 11 Jun 2017 19:42:50 +0300, you wrote:

>So my question is: does the driver care (or even 
>know) the difference between a flat 50 ohm line 
>to an amplifier or one that is running at a 2:1 SWR, 
>but whose length is such that the driver "sees" an 
>impedance of 50+j0 Ohms.
>I say no.
>
>Vic 4X6GP 

REPLY:

I say you're right.  The only difference between the two scenarios
above is the one with 2:1 SWR has some additional line loss, but as
you might suspect, the driver does not "see" that. 

73, Bill W6WRT