[Amps] Ten-Tec Titan 10 Meter Input SWR

[donroden at hiwaay.net]

True
Don W4DNR

Quoting Bill Turner <dezrat at outlook.com>:

> ------------ ORIGINAL MESSAGE ------------(may be snipped)
>
> On Sun, 11 Jun 2017 19:42:50 +0300, you wrote:
>
>> So my question is: does the driver care (or even
>> know) the difference between a flat 50 ohm line
>> to an amplifier or one that is running at a 2:1 SWR,
>> but whose length is such that the driver "sees" an
>> impedance of 50+j0 Ohms.
>> I say no.
>>
>> Vic 4X6GP
>
> REPLY:
>
> I say you're right.  The only difference between the two scenarios
> above is the one with 2:1 SWR has some additional line loss, but as
> you might suspect, the driver does not "see" that.
>
> 73, Bill W6WRT
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps