[Amps] Novice heater choke question

[Paul Decker]

Wouldn't it depend on the gain or lack of gain of the antenna?   1.5KW into a -21dbi load is about 4.6 watts EIRP no?




> 
>     Date: Wed, 24 May 2017 11:42:29 -0400From: n8de at thepoint.netTo: amps at contesting.com
>     Subject: Re: [Amps] Novice heater choke question
>     Message-ID: <20170524114229.2lr2wse5cgw0swkk at webmail.win.net>
>     Content-Type: text/plain; charset=ISO-8859-1; DelSp="Yes";
>     format="flowed"
> 
>     As the FCC proposal for this band includes a restriction to 5 watts
>     EIRP ... do you think an amp there is within the rules?
> 
>     73
>     Don
>     N8DE
> 
>     Quoting Chris Wilson <chris at chriswilson.tv>:
> 
>     >
>     >
> 
>         > > 
> >         24/05/2017 16:02
> > 
> >         I want to build a tube amp for 136kHz (yes, kHz...). I have built
> >         several push pull quasi Class D push pull FET amps with a centre
> >         tapped output transformer. The centre tap is fed from B+ with an iron
> >         dust toroidal wound choke. It can handle 20 Amps. Can I use a similar
> >         choke as a filament choke for a grounded grid GS35B amp? I am
> >         envisaging running the choke off a SMPS on DC as do quite a few
> >         builders. Thanks.
> > 
> >         --
> >         Best Regards,
> >         Chris Wilson.
> >         mailto: chris at chriswilson.tv
> > 
> >     >