[Amps] Extra Fan Mod for 87A

[Ed Muns]

I've always included a wire grill under those screws.  I don't recall what voltage the fan required.  It may have been 115 VAC.

73,
Ed W0YK
On Oct 20, 2017 11:48 PM, gudguyham--- via Amps <amps at contesting.com> wrote:
>
>
>
>
>
> -----Original Message----- 
> From: gudguyham <gudguyham at aol.com> 
> To: jim <jim at audiosystemsgroup.com> 
> Sent: Sat, Oct 21, 2017 2:47 am 
> Subject: Re: [Amps] Extra Fan Mod for 87A 
>
>
> I installed one for a customer.  The back of the amp has threaded inserts to accept the normal bolt pattern of the typical muffin fan.  I simply used a long enough screw to reach to the amp rear panel. 
>
>
>
> -----Original Message----- 
> From: Jim Brown <jim at audiosystemsgroup.com> 
> To: Amps Amps <amps at contesting.com> 
> Sent: Sat, Oct 21, 2017 1:10 am 
> Subject: [Amps] Extra Fan Mod for 87A 
>
> What does it take to add this to an 87A? Are there mounting holes and a 
> cutout where I can simply add a generic fan and run it from 12V? 
>
> Thanks and 73, Jim K9YC 
>
> _______________________________________________ 
> Amps mailing list 
> Amps at contesting.com 
> http://lists.contesting.com/mailman/listinfo/amps 
>
>
> _______________________________________________ 
> Amps mailing list 
> Amps at contesting.com 
> http://lists.contesting.com/mailman/listinfo/amps