[Amps] Extra Fan Mod for 87A
Carl
km1h at jeremy.qozzy.com
Sun Oct 22 20:40:00 EDT 2017
My 76PA (3 tubes) already had that fan when it arrived here from a Carribean
contest station. It didnt save the amp from a blown transformer, tubes,
bandswitch, and more, thanks to very non technical and inexperienced
operators.
It has been running fine here for about 12-15 years with that fan as it
often gets used on AM wih a rewound transformer.
Carl
----- Original Message -----
From: "gudguyham--- via Amps" <amps at contesting.com>
To: <amps at contesting.com>
Sent: Saturday, October 21, 2017 2:48 AM
Subject: [Amps] Extra Fan Mod for 87A
>
>
>
>
> -----Original Message-----
> From: gudguyham <gudguyham at aol.com>
> To: jim <jim at audiosystemsgroup.com>
> Sent: Sat, Oct 21, 2017 2:47 am
> Subject: Re: [Amps] Extra Fan Mod for 87A
>
>
> I installed one for a customer. The back of the amp has threaded inserts
> to accept the normal bolt pattern of the typical muffin fan. I simply
> used a long enough screw to reach to the amp rear panel.
>
>
>
> -----Original Message-----
> From: Jim Brown <jim at audiosystemsgroup.com>
> To: Amps Amps <amps at contesting.com>
> Sent: Sat, Oct 21, 2017 1:10 am
> Subject: [Amps] Extra Fan Mod for 87A
>
> What does it take to add this to an 87A? Are there mounting holes and a
> cutout where I can simply add a generic fan and run it from 12V?
>
> Thanks and 73, Jim K9YC
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
---
This email has been checked for viruses by AVG.
http://www.avg.com
More information about the Amps
mailing list