[Amps] Bird Slug Modification?

[Jim W7RY]

Lots of stuff on the Repeater Builder site about Bird Slugs.  Just search 
for Repeater builder bird slugs.


73
Jim W7RY


-----Original Message----- 
From: Paul Baldock
Sent: Wednesday, October 25, 2017 7:49 PM
To: amps at contesting.com
Subject: Re: [Amps] Bird Slug Modification?

After receiving some good tips about the coupling of a 5W slug being
too tight to convert to a 1KW slug with just a resistor change, I've
decided to move the pickup further from the transmission line. After
a little experimenting this seems to work. I only need it to be
accurate on 50MHz, so if I screw up the bandwdith it will not really matter.

- Paul




At 05:17 PM 10/25/2017, donroden at hiwaay.net wrote:
>Google a QST slug calibration article from a few years ago.
>
>Don W4DNR
>
>
>Quoting Paul Baldock <paul at paulbaldock.com>:
>
>>I have a 5W 50-125MHz slug. Can I turn it into a 1KW slug by adding
>>a suitable series resistor?
>>
>>Thanks
>>
>>-  Paul  KW7Y
>>
>>_______________________________________________
>>Amps mailing list
>>Amps at contesting.com
>>http://lists.contesting.com/mailman/listinfo/amps
>
>
>_______________________________________________
>Amps mailing list
>Amps at contesting.com
>http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps