[Amps] MLA2500 Power Switch

[Stan Gammons]

Best bet would likely be Mouser or Digi-Key.   Take a digital micrometer 
and measure the dimensions of the switch body.  Search for a rocker 
switch of similar ratings on the Mouser or Digi-Key website. Then look 
at the datasheet for the rocker switch to see if you can find a match or 
something close dimensions wise that has the same or greater current 
rating.   If it's the same switch as the Clipperton L, I think this one 
will work 
https://www.mouser.com/productdetail/ck-components/cm102j12s205dqa?qs=sGAEpiMZZMtNT9UGfLL4eOd3cDQgL8vMAzXeU%2Fx3f0Q%3D


Good luck.

73

Stan
KM4HQE


On 01/28/2018 03:18 PM, Thomas Rieff wrote:
> Looks like my power switch is inconsistent and not making contact all the
> time.
>
> Have it out to see what it has for numbers...
> 27 . R . C . 1
> 16 Amp.3/4HP.120 VAC
> 3 Terminals
>
> Any thoughts on where a person might find a replacement?
> Tom
>
> K0YR
> C/O Thomas Rieff
> 2059 Sundance Lane
> North Mankato, MN 56001
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps