[Amps] 4CX1000a test and gettering

[Alek Petkovic]

Yes. Do it in your own amp.

Install the tube and run the heater and fan only, for a day or two. Very 
simple.

Before you do that, if you have a 1kV Megger, you can test the cold 
tube, between all elements, for leakage. If there is a problem, it will 
usually show up with that test.

If there is no problem, You should be pretty safe in plugging in the 
tube, without the conditioning process.

73, Alek.



On 15/06/2019 12:20 AM, Edward stallman wrote:
> I bought a NOS Eimac 4CX1000a . Looking at the tube, ir shows no signs 
> it has been used. Is their a place I can send the tube  to have it 
> Gettered and tested before installing in my Acom 2100 amp ?
>
> Tnx Ed N5DG
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps

-- 
 From sunny Binningup



Family Businesses:
SP Electrical. www.spelectrical.net.au
The Velvet Fox. https://www.facebook.com/TheVelvetFox/
Smart Design Electrical. https://www.facebook.com/smartdesignelectrical/
Perth Interiors. https://www.instagram.com/perthinteriors/