[Amps] SB-220 HV Transformer Wanted

[Joe]

Umm Nope, 3500+ The plate voltage meter is not quite HARD pegged but 
easily over full scale.
When testing at lower voltages for the in vs out ratios and with the in 
that I have I'm calculating close to 3650
Joe WB9SBD

On 10/30/2019 8:00 PM, Jim wrote:
> And it only produces 2240 volts DC. A bit low for an SB220....
>
>
> Thanks
> 73
> Jim W7RY
>
> On 10/30/2019 1:38 PM, Joe Subich, W4TV wrote:
>>
>> >> https://www.antekinc.com/as-8t800-800va-transformer/
>>
>> Unfortunately, this transformer lacks the primary taps for CW/SSB
>> operation of the OEM device.
>>
>> 73,
>>
>>    ... Joe, W4TV
>>
>>
>> On 2019-10-30 10:23 AM, Joe wrote:
>>>
>>> On 10/30/2019 8:56 AM, Joe wrote:
>>>> Morning Dick,
>>>> If you are not afraid of making a few electrical and mechanical 
>>>> modifications, I would go with this transformer.
>>>> https://www.antekinc.com/as-8t800-800va-transformer/
>>>>
>>>> I'm glad I did! 1/4 the cost of most drop in replacements. yet MUCH 
>>>> better performance!
>>>> Joe WB9SBD
>>>
>>> _______________________________________________
>>> Amps mailing list
>>> Amps at contesting.com
>>> http://lists.contesting.com/mailman/listinfo/amps
>>>
>> _______________________________________________
>> Amps mailing list
>> Amps at contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps