[Amps] SB-220 HV Transformer Wanted

[Jim]

The transformer you sent the link for is this one:


Output Voltage 	Current
800V 	.50A

*800 VAC X 2.8 (for a voltage doubler) is 2240 volts DC. ********How do you get 3500 volts+ of out that?*****



Thanks
73
Jim W7RY

On 10/30/2019 9:05 PM, Joe wrote:
> Umm Nope, 3500+ The plate voltage meter is not quite HARD pegged but 
> easily over full scale.
> When testing at lower voltages for the in vs out ratios and with the 
> in that I have I'm calculating close to 3650
> Joe WB9SBD
>
> On 10/30/2019 8:00 PM, Jim wrote:
>> And it only produces 2240 volts DC. A bit low for an SB220....
>>
>>
>> Thanks
>> 73
>> Jim W7RY
>>
>> On 10/30/2019 1:38 PM, Joe Subich, W4TV wrote:
>>>
>>> >> https://www.antekinc.com/as-8t800-800va-transformer/
>>>
>>> Unfortunately, this transformer lacks the primary taps for CW/SSB
>>> operation of the OEM device.
>>>
>>> 73,
>>>
>>>    ... Joe, W4TV
>>>
>>>
>>> On 2019-10-30 10:23 AM, Joe wrote:
>>>>
>>>> On 10/30/2019 8:56 AM, Joe wrote:
>>>>> Morning Dick,
>>>>> If you are not afraid of making a few electrical and mechanical 
>>>>> modifications, I would go with this transformer.
>>>>> https://www.antekinc.com/as-8t800-800va-transformer/
>>>>>
>>>>> I'm glad I did! 1/4 the cost of most drop in replacements. yet 
>>>>> MUCH better performance!
>>>>> Joe WB9SBD
>>>>
>>>> _______________________________________________
>>>> Amps mailing list
>>>> Amps at contesting.com
>>>> http://lists.contesting.com/mailman/listinfo/amps
>>>>
>>> _______________________________________________
>>> Amps mailing list
>>> Amps at contesting.com
>>> http://lists.contesting.com/mailman/listinfo/amps
>>
>> _______________________________________________
>> Amps mailing list
>> Amps at contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>