[Amps] FL2100B bias

[Aleksandar Petkovic]

As the value of the shunt is not given in the manual, you would need to 
put your DMM in series with the Yaesu meter and compare the readings.

73, Alek, VK6APK.

On 14/11/2020 11:35 am, John Keating wrote:
> Does anyone on the list know what the voltage across the R3 shunt (in the FL2100B plate current meter circuit) should be at a 90mA bias current? I trust my DMM but not the Yaesu meter.
>
> 73, John
> AI6LY
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps