[Amps] Amps Digest, Vol 224, Issue 12

[Paul Baldock]

Thanks Jay,  that's  very helpful.

Paul KW7Y

Sent from my Verizon, Samsung Galaxy smartphone
Get Outlook for Android<https://aka.ms/AAb9ysg>

________________________________
From: Amps <amps-bounces at contesting.com> on behalf of Jay Terleski <jayt at arraysolutions.com>
Sent: Thursday, August 19, 2021, 11:10 AM
To: amps at contesting.com
Subject: Re: [Amps] Amps Digest, Vol 224, Issue 12

Paul,

This is not an easy job.  It may take 2 to 3 hours.
You need to remove the AC filter assembly to expose the Switch ON (SWON)
board.  Take all the connections off it, making sure you note where they go
back on for later.
Watch out for the ribbon cable stuff.
Remove the SWON board and you again need to carefully remove the
connections from it.  Then with the proper metric tools remove the HV board.

If you run into issues you can send it back to us for repair of course.
Jay, WX0B


Jay Terleski
Array Solutions
214 954 7140



On Thu, Aug 19, 2021 at 11:00 AM <amps-request at contesting.com> wrote:

> Send Amps mailing list submissions to
>         amps at contesting.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://lists.contesting.com/mailman/listinfo/amps
> or, via email, send a message with subject or body 'help' to
>         amps-request at contesting.com
>
> You can reach the person managing the list at
>         amps-owner at contesting.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Amps digest..."
>
>
> Today's Topics:
>
>    1. OM-2000A+ (paul at paulbaldock.com)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Thu, 19 Aug 2021 01:32:18 -0700
> From: <paul at paulbaldock.com>
> To: <amps at contesting.com>
> Subject: [Amps] OM-2000A+
> Message-ID: <009101d794d4$b93588f0$2ba09ad0$@paulbaldock.com>
> Content-Type: text/plain;       charset="us-ascii"
>
>
> I am repairing an OM-2000A+ for fiend. I need to replace the glitch
> resistor
> on the HV Board, This board is rather buried in the amp and it looks like
> it
> will be a major disassembly procedure to remove. Has anybody experience
> working on the HV Board in this amp and knows the simplest way to access
> it?
>
> Thanks
>
> - Paul KW7Y
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> ------------------------------
>
> End of Amps Digest, Vol 224, Issue 12
> *************************************
>
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps