[Amps] Amps Digest, Vol 224, Issue 12

Carl km1h at jeremy.qozzy.com
Sun Aug 22 12:50:45 EDT 2021


It sounds like a good time to find an alternative location for the resistor, 
being hams function trumps beauty.

Carl


----- Original Message ----- 
From: "Jay Terleski" <jayt at arraysolutions.com>
To: <amps at contesting.com>
Sent: Thursday, August 19, 2021 2:09 PM
Subject: Re: [Amps] Amps Digest, Vol 224, Issue 12


> Paul,
>
> This is not an easy job.  It may take 2 to 3 hours.
> You need to remove the AC filter assembly to expose the Switch ON (SWON)
> board.  Take all the connections off it, making sure you note where they 
> go
> back on for later.
> Watch out for the ribbon cable stuff.
> Remove the SWON board and you again need to carefully remove the
> connections from it.  Then with the proper metric tools remove the HV 
> board.
>
> If you run into issues you can send it back to us for repair of course.
> Jay, WX0B
>
>
> Jay Terleski
> Array Solutions
> 214 954 7140
>
>
>
> On Thu, Aug 19, 2021 at 11:00 AM <amps-request at contesting.com> wrote:
>
>> Send Amps mailing list submissions to
>>         amps at contesting.com
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>>         http://lists.contesting.com/mailman/listinfo/amps
>> or, via email, send a message with subject or body 'help' to
>>         amps-request at contesting.com
>>
>> You can reach the person managing the list at
>>         amps-owner at contesting.com
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of Amps digest..."
>>
>>
>> Today's Topics:
>>
>>    1. OM-2000A+ (paul at paulbaldock.com)
>>
>>
>> ----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Thu, 19 Aug 2021 01:32:18 -0700
>> From: <paul at paulbaldock.com>
>> To: <amps at contesting.com>
>> Subject: [Amps] OM-2000A+
>> Message-ID: <009101d794d4$b93588f0$2ba09ad0$@paulbaldock.com>
>> Content-Type: text/plain;       charset="us-ascii"
>>
>>
>> I am repairing an OM-2000A+ for fiend. I need to replace the glitch
>> resistor
>> on the HV Board, This board is rather buried in the amp and it looks like
>> it
>> will be a major disassembly procedure to remove. Has anybody experience
>> working on the HV Board in this amp and knows the simplest way to access
>> it?
>>
>> Thanks
>>
>> - Paul KW7Y
>>
>>
>> ------------------------------
>>
>> Subject: Digest Footer
>>
>> _______________________________________________
>> Amps mailing list
>> Amps at contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
>>
>> ------------------------------
>>
>> End of Amps Digest, Vol 224, Issue 12
>> *************************************
>>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps 


---
This email has been checked for viruses by AVG.
https://www.avg.com



More information about the Amps mailing list