[Amps] MLA-2500 Tube Conversion

[N4zed]

Thanks Jay, I have the correct filament transformer.

 

Ken

N4zed

 

From: Jay Sturtevant <k2ztdx at gmail.com> 
Sent: Sunday, October 10, 2021 12:58 PM
To: N4zed <n4zed at comcast.net>
Cc: Amplifier Reflector <Amps at contesting.com>
Subject: Re: [Amps] MLA-2500 Tube Conversion

 

You might want to check with an expert on this forum to make sure your filament supply is correct. I run a pair of 3cx800A7s and the designer/builder stressed correct filament voltage,  if I remember correctly.

 

Jay, K2ZT 

 

On Sun, Oct 10, 2021, 11:01 AM N4zed <n4zed at comcast.net <mailto:n4zed at comcast.net> > wrote:

Has anyone here attempted the tube conversion for the Dentron MLA-2500 from
the 8875 tube to the 3CX800A7?

I have the instructions laid out by LX2KL and I have a filament transformer
for the tubes.





Thanks

N4zed





-- 
This email has been checked for viruses by AVG.
https://www.avg.com
_______________________________________________
Amps mailing list
Amps at contesting.com <mailto:Amps at contesting.com> 
http://lists.contesting.com/mailman/listinfo/amps