[Amps] What to do about 'Neutral' in HB amp?

[Ron W4BIN]

   Hi steve at nr4m.com:

   You should think about the power supply has L1 and L2 as it's power 
input.
If it is 120. Volts or
if it is 240. Volts it doesn't matter an appropriate THREE pin plug is 
correct, *
there is no other wire or pin to consider, any method that makes it work 
is fine.
   Operating on 240. Volts is superior as it allows the use of thinner 
wire and
a lesser current through plugs and switches.  AWG 10. should not be 
necessary.

_In the amplifier_ there is no neutral, only L1 and L2.

*
   120 Volts =
   |   |
    o


   240 Volts =
   -   -
     o

On 12/28/22 11:05 AM, Victor Rosenthal 4X6GP wrote:
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps

-- 
    Ron  W4BIN - Understanding is much better than
                                       knowing how.MX