Try this on your Pentium pee cee
KA9FOX at aol.com
KA9FOX at aol.com
Fri Dec 2 13:24:41 EST 1994
Sorry guys, I just couldn't resist (it's friday!).....
Q&A: THE PENTIUM FDIV BUG
Q: How many Pentium designers does it take to screw in a light bulb?
A: 1.99904274017, but that's close enough for non-technical people.
Q: What do you get when you cross a Pentium PC with a research grant?
A: A mad scientist.
Q: What's another name for the "Intel Inside" sticker they put on
Pentiums?
A: The warning label.
Q: What do you call a series of FDIV instructions on a Pentium?
A: Successive approximations.
Q: Complete the following word analogy: Add is to Subtract as Multiply
is to:
1) Divide
2) ROUND
3) RANDOM
4) On a Pentium, all of the above
A: Number 4.
Q: What algorithm did Intel use in the Pentium's floating point divider?
A: "Life is like a box of chocolates." (Source: F. Gump of Intel)
Q: Why didn't Intel call the Pentium the 586?
A: Because they added 486 and 100 on the first Pentium and got
585.999983605.
Q: According to Intel, the Pentium conforms to the IEEE standards 754
and 854 for floating point arithmetic. If you fly in aircraft
designed using a Pentium, what is the correct pronunciation of "IEEE"?
A: Aaaaaaaiiiiiiiiieeeeeeeeeeeee!
DAVID NUMBERMAN'S TOP TEN LIST
TOP TEN NEW INTEL SLOGANS FOR THE PENTIUM
---------------------------------------
9.9999973251 It's a FLAW, Dammit, not a Bug
8.9999163362 It's Close Enough, We Say So
7.9999414610 Nearly 300 Correct Opcodes
6.9999831538 You Don't Need to Know What's Inside
5.9999835137 Redefining the PC -- and Mathematics As Well
4.9999999021 We Fixed It, Really
3.9998245917 Division Considered Harmful
2.9991523619 Why Do You Think They Call It *Floating* Point?
1.9999103517 We're Looking for a Few Good Flaws
0.9999999998 The Errata Inside
I don't make this stuff up... I just pass it on. Have a nice weekend.
73 Scott KA9FOX
ka9fox at aol.com
>From Jay Townsend" <jayt at comtch.iea.com Fri Dec 2 19:21:13 1994
From: Jay Townsend" <jayt at comtch.iea.com (Jay Townsend)
Date: Fri, 2 Dec 1994 11:21:13 -0800 (PST)
Subject: Last two
Message-ID: <m0rDdXe-0001euC at comtch.iea.com>
> > OK folks - I give... help a 'new' ham understand the last 2
> > practice, why it is bad, and what a DX net's (a DX net doesn't
> > sound like fun to me) connection is to this allegely illegal activity.
> > If full calls only, then do short call hams have an advantage
> > over long call hams? Is this some kind of pile-up management technique?
You bet Mike Short calls are a lot faster and of course much easier to say,
which is one of the reason's that Extra's go for the 1 x 2 and 2 x 1
callsigns. And I think that's one of the big reasons that hams with the
short calls are always for "full calls". They/we oughta have a bit more
compassion for calls that are longer. After using WA7EGA in SS one year the
next I insisted on using mine!
> >
> > Thanks - Mike - KE4END :-)
I think Mike that part of the problem is that when a DX station is working a
SSB pileup it appears that he/she sometimes is doing things with two letters
or part of a callsign. And indeed to some extent it is easier to pull out a
couple of letters, but only from a complete call. Its always best to use the
whole callsign. Just because it sounds like partical calls are being used
by the DX, most of the times they are just getting a piece of a longer call.
So complete calls are best.
For example when running a roaring pileup on SSB you might hear >>>
lajds;fjk;asdfjk seven papa november taay xkl;jafj;a;sdfj; six mike .s.f,am/dfasdf
and from this a DX station would say something like The SEVEN PAPA NOVEMBER
UR 599. Then the KILO ALPHA SEVEN PAPA NANCY (these are fictious calls)
would complete the exchange. Actually the operator is looking for complete
calls and will almost always to the complete ones first.
The big problem comes when a contest is going on or when an operator like
N6KT is at HC8A and is writing down 4 or 5 calls at a time and working them
so quickly that its almost amazing. Then anyone doing part of a call either
gets left out or it slows the rate way way down.
As to the DX nets and all of that I don't have much of an opinion. I don't
spend much time there, but as an old military operator I have always thought
that whatever the net control station does or wants is how it should be
done. However, one does need to identify in accordance with the rules.
Actually though DX is much easier to come by with the Cluster spotting
systems than any DX net. In fact, I think that the spotting systems have
done more to make DXCC easy than nets by a factor of a 100. (By the way I
run one!).
--
Jay Townsend, Ws7i < jayt at comtch.iea.com >
>From zephd at iquest.net (David Zeph) Fri Dec 2 19:37:00 1994
From: zephd at iquest.net (David Zeph) (David Zeph)
Date: Fri, 2 Dec 94 14:37 EST
Subject: #47 Lamp Protection
Message-ID: <m0rDdnM-000E2uC at dorite.use.com>
Jim, KR9U writes:
>> We have been using light bulbs in the receive path for years.
>> As the bulb starts glowing its resistance goes up.
>> Believe me I have seen these bulbs very bright. So far
>> no dead front ends. Number 47 seems to work fine.
>> Of course BPF and stubs are a necessity, but *mistakes*
>> can happen.
>> Jim, KR9U
This remoned me of the old Drake TR-4 transceiver. It used a #47 lamp for
receiver protection. We used 5 TR-4's and a C-Line for 160Mduring the PJ0MM
M/M in 1968. Our antennas were in a relatively confined space by modern
standards. Jim's note reminded me of how brightly and how often they
glowed! But we didn't have any rig problems either.
73 ---> Dave, W9ZRX (zephd at iquest.net)
>From Lunt, Billy, KR1R" <blunt at arrl.org Fri Dec 2 20:30:00 1994
From: Lunt, Billy, KR1R" <blunt at arrl.org (Lunt, Billy, KR1R)
Date: Fri, 02 Dec 94 15:30:00 EST
Subject: ARRL OUTGOING QSL SERVICE NEWS RELEASE
Message-ID: <2EDF8432 at arrl.org>
----------
From: Zimmerman, Tammy-Beth, KA1WWP
To: Kennamer, Bill, K5FUV; Lunt, Billy, KR1R
Subject: Please post to DX and Contest Reflectors
Date: Fri, Dec 2, 1994 2:25PM
The American Radio Relay League
225 Main Street, Newington CT USA 06111
Telephone: 203-666-1541
Telefax: 203-665-7531
MCI Mail ID: 450-7394
Internet: qsl at arrl.org
ARRL OUTGOING QSL SERVICE NEWS RELEASE
FOR IMMEDIATE RELEASE
December 2, 1994 For Further Information Contact:
Joe Carcia, NJ1Q
The ARRL and the KCDXA (W0 QSL Bureau) reach an agreement.
It has been announced that the ARRL and the Kansas City DX Club, have
reached a mutual agreement on the operation of the W? QSL Bureau. The KCDXC
will continue on with the W? Bureau operations.
-30-
>From Gary T. Schwartz" <garyk9gs at solaria.sol.net Fri Dec 2 20:52:56 1994
From: Gary T. Schwartz" <garyk9gs at solaria.sol.net (Gary T. Schwartz)
Date: Fri, 2 Dec 1994 14:52:56 -0600 (CST)
Subject: Thanks help on FONT_.exe
Message-ID: <Pine.3.02.9412021456.C22049-8100000 at solaria.mil.wi.us>
Thanks for the help with ftp'ing FONT106.exe. I later found out the ftp
feature on my net provider was down...that's why it didn't work!
73 Gary
K9GS
>From Daniel R. Violette" <Daniel_R._Violette at smtpgty.anatcp.rockwell.com Fri Dec 2 21:28:56 1994
From: Daniel R. Violette" <Daniel_R._Violette at smtpgty.anatcp.rockwell.com (Daniel R. Violette)
Date: Fri, 02 Dec 94 13:28:56 PST
Subject: New JA Window on 160M ?
Message-ID: <9411027864.AA786403804 at smtpgty.anatcp.rockwell.com>
What is the new 160M window for Japan. I think the other is
1907.5-1912.5.
Thanks, listen for N4EA/6 out of Orange Section, CA.
73,
Dan KI6X
e-mail: Daniel_R._Violette at smtpgty.anatcp.rockwell.com
>From Mark E. Bailey" <mebly at Glue.umd.edu Fri Dec 2 22:09:16 1994
From: Mark E. Bailey" <mebly at Glue.umd.edu (Mark E. Bailey)
Date: Fri, 2 Dec 1994 17:09:16 -0500
Subject: Last two
Message-ID: <199412022209.RAA14677 at periodic.eng.umd.edu>
>> OK folks - I give... help a 'new' ham understand the last 2
>> practice, why it is bad, and what a DX net's (a DX net doesn't
>> sound like fun to me) connection is to this allegely illegal activity.
>> If full calls only, then do short call hams have an advantage
>> over long call hams? Is this some kind of pile-up management technique?
>>
>> Thanks - Mike - KE4END :-)
[...]
>The BIG problem part - Use of "last-two" outside net operations for
>working DX and contesting is extremely inefficient. Think about it. For
>the DX and station calling, at least one extra callsign transmission must be
>made to establish the full call of the station calling.
[...]
>Note that instead of repeating my call in the pileup, I have to repeat it
>at least once in step 4, probably twice, and the DX must repeat it in step
>5, rather than once in step 3. That's three extra repeats of my call, all
>while others are waiting to make a QSO.
I agree with the above, but with one exception. Very often, in LARGE pileups,
the DX station is only getting fragments of callsigns. Listening for a minute
or two will verify this. (Is the station coming back to KILO ECHO FOUR
ECHO NORWAY DENMARK or "The station ending in NORWAY DENMARK?") In the latter
case, I find the "last two" technique works VERY WELL in breaking pileups
that I can't otherwise get through. If the DX station is getting full
callsigns, I don't do this.
It is usually unnecessary on CW (my primary mode). This fits in VERY WELL
with my primary philosophy in breaking pileups:
GIVE 'EM WHAT THEY WANT.
73.
~r .signature
>From Mark E. Bailey" <mebly at Glue.umd.edu Fri Dec 2 22:34:30 1994
From: Mark E. Bailey" <mebly at Glue.umd.edu (Mark E. Bailey)
Date: Fri, 2 Dec 1994 17:34:30 -0500
Subject: FCC CITATIONS?
Message-ID: <199412022234.RAA12738 at digital.eng.umd.edu>
On Dec 1, 4:12pm, CHUCKAB7BB at aol.com wrote:
>> Subject: Re: FCC CITATIONS?
>>You are absolutley right regarding the requirements for I.D. That
>> being:
>> 1) id in English
>> 2) id at the end of a transmission
>> 3) id not later then every 10 minutes during a transmission
> The key point is the id, i.e., full call sign, not a fragment of a
> callsign.
> 73, Jim, WA6SDM
> jholly at cup.hp.com
But, I can scream into a pileup my last two and, every ten minutes, give
my full call. I can also give my full call when I work the guy or give
up in disgust. I rarely use the last-two technique, but it works on
occassion. I stress that I only find it useful when the DX operator is
only getting partial callsigns anyway.
Also, in the typical exchange, the S&P station may not be legal anyway.
RUN: TU EA8EA
S&P: KD4D
RUN: KD4D 5nn 33
S&P: 5nn 5
RUN: TU EA8EA
Using a known call for NO GOOD REASON. I didn't ID on my last transmission.
73.
Mark Bailey KD4D Motto: Life's too short to drink cheap beer.
mebly at glue.umd.edu Disclaimer: I didn't really say this.
>From Trey Garlough <GARLOUGH at TGV.COM> Fri Dec 2 22:55:18 1994
From: Trey Garlough <GARLOUGH at TGV.COM> (Trey Garlough)
Date: Fri, 2 Dec 1994 14:55:18 -0800 (PST)
Subject: ON6TT's comments
Message-ID: <786408918.5407.GARLOUGH at TGV.COM>
> Congrats to HG73DX... You guys are always loud and can always hear me on
> every band. Sure would like to know what they are using and what kind of
> QTH they have there.
You mean QTHs (plural) don't you?
--Trey, WN4KKN/6
>From Morao Esteban <z801183a at bcfreenet.seflin.lib.fl.us> Sat Dec 3 03:28:17 1994
From: Morao Esteban <z801183a at bcfreenet.seflin.lib.fl.us> (Morao Esteban)
Date: Fri, 2 Dec 1994 22:28:17 -0500 (EST)
Subject: No subject
Message-ID: <Pine.3.89.9412022208.A1855-0100000 at bcfreenet.seflin.lib.fl.us>
Hi,
I just finish taking in the phone with Kappy (WA4WTG), and he ask me to
posted the following:
"Kappy WA4WTG is the QSL manager for C6AHY ( CQ WW CW '94), WS4E, C6AHY,
and V73Y. Please send QSL cards direct to his Callbook Address. He also
will like to remind that the U.S. postage will increase from 29 cents to
32 cents in January '95, so please, include de proper postage. He will
try to get the QSL form C6AHY as soon as posible."
Please feel free to pass this information,
73 from Sunny South Florida,
Steve W4/YV5DTA
z801183a at bcfreenet.seflin.lib.fl.us
>From Tim Totten, KJ4VH" <kj4vh at iglou.com Sat Dec 3 04:32:36 1994
From: Tim Totten, KJ4VH" <kj4vh at iglou.com (Tim Totten, KJ4VH)
Date: Fri, 2 Dec 1994 23:32:36 -0500 (EST)
Subject: FIX_MINE.EXE
Message-ID: <Pine.SOL.3.91.941202232740.4766C-100000 at iglou>
On Fri, 2 Dec 1994, ND3A wrote:
> I have the file FIX_MINE.EXE and tried to use it on the VP2EZA log. It
> counted through the log and said that 0 VP2EZA calls were processed. I
> know that there were two in the log. The file is dated November, 1993.
> Is this file only good for CT8? I checked the CT9 distribution disk and
> did not see it there. I tried the CT BBS and there was no answer.
> Thanks in advance for any replies!
Rather than mess with FIX_MINE, if there is a QSO that I need to get rid
of after it's in the log (like I inadvertently hit <Enter>), I normally
overtype it with the callsign right above it (assuming on the same band),
thus turning the QSO into a zero-point DUPE.
73,
Tim Totten, KJ4VH
kj4vh at iglou.com
>From moriyama at civil.kyushu-u.ac.jp (Toshiyuki Moriyama) Sat Dec 3 06:18:54 1994
From: moriyama at civil.kyushu-u.ac.jp (Toshiyuki Moriyama) (Toshiyuki Moriyama)
Date: Sat, 3 Dec 1994 15:18:54 +0900
Subject: New JA Window on 160M ?
Message-ID: <199412030618.PAA01870 at yamashiro.civil.kyushu-u.ac.jp>
At 1:28 PM 94.12.2 -0800, Daniel R. Violette wrote:
> What is the new 160M window for Japan. I think the other is
> 1907.5-1912.5.
I did not know news that the new window is avairable....
I heard that there is a plan to make other window at 18??KHz
with 10KHz width.
Tosy, JA6VZB/AH0T/KC6VW/V63BM
$B?9;3!w7z at _ET;T9)!%6e=#Bg3X(B
>From David & Barbara Leeson <0005543629 at mcimail.com> Sat Dec 3 00:19:00 1994
From: David & Barbara Leeson <0005543629 at mcimail.com> (David & Barbara Leeson)
Date: Fri, 2 Dec 94 19:19 EST
Subject: Kenwood Transverter Plug
Message-ID: <42941203001924/0005543629NA1EM at MCIMAIL.COM>
Gerry, I can't access att.com directly from mci.com, plus I thought others
might be interested in this as well.
You're right, the 8-pin DIN plug that Kenwood uses for transverter connect
on the TS-830, TS-930 and TS-940 is a non-standard plug, with different
indexing and pin diameter.
You want Kenwood part number E07-0851-05. I bought three (one to use, two
to lose) from Robert Hall, a local Kenwood repair facility, for $6.30 each.
He says he sees broken jacks all the time on the radios from people forcing
the wrong connector. You might try the nearest Kenwood repair facility before
trying their parts subcontractor, whom I have found to be difficult to
reach by phone.
Note that the numbering of the pins is not the same as for a standard 8-pin
DIN connector, as pin 8 is on the outer ring rather than in the center. The
schematic in the manual is correct, as far as I know.
73 de Dave, W6QHS
>From David & Barbara Leeson <0005543629 at mcimail.com> Sat Dec 3 01:50:00 1994
From: David & Barbara Leeson <0005543629 at mcimail.com> (David & Barbara Leeson)
Date: Fri, 2 Dec 94 20:50 EST
Subject: W3LPL Filters
Message-ID: <04941203015040/0005543629NA4EM at MCIMAIL.COM>
I've built and used another design published by K4VX...see NCJ, March/April
1987, pg. 19 and QST, Sept. 1988, pg. 17. These seem to work very well, and
are easy to make.
Dave, W6QHS
>From David & Barbara Leeson <0005543629 at mcimail.com> Sat Dec 3 02:19:00 1994
From: David & Barbara Leeson <0005543629 at mcimail.com> (David & Barbara Leeson)
Date: Fri, 2 Dec 94 21:19 EST
Subject: ICE & Dunestar
Message-ID: <44941203021944/0005543629NA5EM at MCIMAIL.COM>
The subject of band filters reminded me of a very fine experience we had
at HC8A with both ICE and Dunestar.
When we got there we discovered we had left almost all band filters behind,
as it was unusual to be doing a M/S there. The phone service from the island
is quite limited, but you can get ATT Direct after dialing 10-20 times (just
like a big pileup).
We called both Dunestar and ICE, and asked to order for overnight DHL
delivery to Quito so Pedro, HC1OT could bring the filters when he came to
HC8 to operate with us. Talked to Ron at 503-397-2918 at Dunestar and
Mark @ 800-423-2666 at ICE. Both agreed to determine shipping possibilities
and FAX us back, and were ready to accept order without any problems,
although we were getting in at the very end of the CQWW line when inventories
were mostly exhausted.
As it happened, through no fault of theirs, Dunestar wasn't able to get
confirmation from DHL, but very responsibly FAXed us back (not easy, as the
pileup works both ways!) for a decision. Their DHL office could only
guarantee 4-day delivery unless we could pay for a courier, but they gave
it all they had and were ready to build and ship.
ICE had a more responsive DHL office, and even called Pedro in Quito to be
sure he got the filters, which he brought with him. Sure enough, we smoked
the only one for which we had a spare (WATCH THOSE BAD CONNECTORS ON YOUR
JUMPER CABLES!). It sure was great service, and all the rest gave no problem.
I'm sure the one problem was ours, not ICE's.
We had cobbled up some coax stubs, which didn't work nearly as well. We also
found one cable junction outside which made noise until tightened with
pliers. The rest is history, and we are indebted to both outfits.
Thanks for great service to both outfits (BTW, it takes a local to handle
customs without a painful delay). I'd deal with either any day.
As a matter of interest, we got the phone numbers by getting on 20m in a
panic, and got all kinds of feedback from, among others, Jim at ZD8Z about
the relative merits of both makes of filter (and we had both at EA9UK last
year, I seem to remember).
Both ICE and Dunestar earned their 5-star ratings.
Dave, W6QHS
>From John Barry <jbarry at curia.ucc.ie> Sat Dec 3 11:51:34 1994
From: John Barry <jbarry at curia.ucc.ie> (John Barry)
Date: 03 Dec 1994 11:51:34 +0000 (GMT)
Subject: CQWW CW from EI7M
Message-ID: <199412031151.LAA13448 at curia.ucc.ie>
CQ WORLD WIDE DX CONTEST 1994
Call: EI7M Country: Ireland (030)
Mode: CW Category: Multi Single
BAND QSO QSO PTS PTS/QSO ZONES COUNTRIES
160 231 252 1.09 9 53
80 568 948 1.67 18 72
40 491 838 1.71 24 86
20 1106 2108 1.91 37 106
15 799 1798 2.25 27 94
10 118 173 1.47 16 57
---------------------------------------------------
Totals 3313 6117 1.85 131 468 => 3,664,083
Everything seemed to work better for us for this time around. Our
biggest hardware problem was discovering on Sunday morning that
the 10m beam was deaf! The SWR looked okay, but it just didnt
seem to work very well. After checking the coax cables, we took
down the beam, and found the cable to be totally corroded. By the
time we replaced it, the band was on the way out - I wonder was
cable like that for the SSB leg???
The highlight must be our zone total on 20m which was the highest
total we've managed.
73's John
--------------------------
John Barry EI7DNB
jbarry at curia.ucc.ie
>From Doug Grant <0006008716 at mcimail.com> Sat Dec 3 06:36:00 1994
From: Doug Grant <0006008716 at mcimail.com> (Doug Grant)
Date: Sat, 3 Dec 94 01:36 EST
Subject: CQWW CW Scores
Message-ID: <43941203063634/0006008716NA4EM at MCIMAIL.COM>
CQWW CW Rumors
Version 2...0600Z 3 Dec 94
Last Update (going out of town) unless someone else
picks it up for the next week.
73, Doug K1DG
*****
Single Op High Power
K5ZD 4.089M 2491-133-432
KM1H 4.07 2559-132-432 (KQ2M)
W1KM 3.5 2246-127-415
N4RJ 3.45 2201-142-407 (KM9P)
N2LT 3.08 2003-131-404
N6BV 2.85 2076-116-378
K3ZO 2.83 1952-131-381
N6AR 2.4 1434-155-454
KT3Y 2.27 1610-125-380
N2BA 2.02 1543-112-352
K0RF 2.0 1617-137-318
K5MR 1.9 1559-149-332
N5RZ 1.81 1322-144-356
W6EEN 1.77 1605-129-263 (KA6SAR)
K4PQL 1.4 1200-123-343
AB6FO 1.35 1486-115-221
K0KX 953K 823-122-292
W2VJN 863K 941-120-209
K9MA 836K 827-113-263
KB4GID 809K 660-128-331
K6XO 380K 504-100-175
NS0B 369K 455-97-201
AA7FL 193K 345-78-132
K3TLX 109K 212-72-140
still missing: K1ZM, N2NT
P40F 12.6M 6734-149-483 (KR0Y)
PY0FF 11.2 6190-142-468 (CT1BOH)
P40W 10.5 *-*-* (W2GD)
HC8N 10.5 6200-*-* (WN4KKN)
PZ5JR 8.4 5414-132-414 (N6ZZ)
HC1OT 7.2 4993-122-364 (S53R)
VS6WO 6.1 4703-163-393 (WX3N)
ZS6EZ 5.4 3506-145-376
WJ2O/KP2 3.7 4300-*-*
still missing: HC8KU, EA8EA
Single Op Low Power
W2UP 1.48M 1069-121-371
W1PH 1.3 1026-108-339
K7GM 1.25 984-118-342
K2SG 1.12 953-107-315
K7SV 1.0 776-139-356
N4YDU 555K *-*-*
W3CPB 64K 174-43-96
ZF8BS 1.9M 2946-93-205
XE1/AA6RX 1.33 2026-105-197
VG4VV 548K 1242-71-138
KP4VA 328K 1480-29-76 almost all 40M
Single Op QRP
AA2U 533K 577-94-248
N4IJ 122K *-*-*
Single Op Assisted
K3WW 3.03M 1646-154-499
K1IU 2.5 1540-141-437
AA2DU 2.4 1603-126-416 at K1VR
K2WK 2.37 1420-141-455 31.5 hrs
K1DG 2.0 1267-137-410 26 hours
K5NA 1.85 1153-136-444
AA4NC 1.6 1106-133-394
N0AX 343K 504-95-168 low power
K3SA 339K 391-88-227
K1FWF 302K 325-93-245
K1HI 98K 270-44-95
VS6BG 1.49M 2175-118-233
DL2HBX 1.30 1239-133-434
Multi-Single
K1AR 6.7M 3136-155-586 at K1EA
KC1XX 5.57 2793-152-547
N2NU 5.52 *-*-*
N3RS 5.33 2594-159-572
K1TR 4.69 2458-148-523 at K1MNS
K8AZ 4.4 2300-162-525
W6GO 3.4 2423-151-358
KS9K 3.2 2015-153-456
N2IC/0 2.9 1912-155-403
W1CW 2.6 1609-151-442
N6CQ/3 2.5 1605-142-438
NC0P 2.28 1625-144-379
AG6D 2.1 1893-137-269
WX0B 2.0 1567-145-381
K9UWA 2.0 1333-151-421
K1KP 1.9 1361-118-391
NX0I 1.9 1438-150-372
AA6MC 1.6 *-*-*
K8LX 1.005 810-119-325
NP4Z 8.4M 5746-140-461
V31DX 8.0 7171-125-395
OT4T 7.9 4161-192-709 at ON4UN
HZ1AB 7.2 4226-146-460
C6AHX 7.0 4984-140-460
6D2X 7.0 5304-157-413
VE3EJ 6.7 3962-164-525
4U1ITU 4.4 4067-152-525
Multi-Multi
W3LPL 10.2M 4377-186-665
N2RM 9.33 4208-179-627
K1KI 8.22 3888-163-591
K3LR 7.6 3636-172-581
KY1H 5.6 2931-158-545
W0AIH 2.1 1566-143-392
VP5VW 21.6M 11926-171-564
YK0A 11.8 7607-132-420
J77J 8.85 6733-121-417 33 hrs
VP2EZA 8.2 6482-121-444 2 100W rigs
Single Bands
160
AA8U ?K 141-18-44
DL1IAO 106K 812-19-79
G3XTT 68K 658-14-68
80
W1MK 205K 633-24-94
WZ3Q 119K 368-29-90
UN2L 445K 1250-34-108 (UA9BA)
40
K0OD 125K 342-34-98
VR2GO 331K 1520-33-83 (9V1YC)
OZ8RO 185K 788-34-114
20
K8GL 436K 925-37-126
K0KE 407K 1046-34-98 (KT0F)
NF6H 328K 724-39-119
KN6EL 149K 450-32-88 (assisted)
WA6KUI 128K 369-33-97 low power
KP2A 1.36M 3146-38-132
TG0AA ? 3200-35-100 (NL7GP)
9M6NA 989K 2198-37-116
UN4L 610K 1590-37-126
VE3JY 483K 1484-34-100 (VE6WQ)
DL0IU 247K 835-34-114 (DL4AAE)
15
W6YA 215K 598-33-94
W4PZV 180K 529-30-96 (WA4SVO)
KO9Y 93K 280-30-91 low power
S50K 450K 1325-38-117
10
W4YV ? 190-22-63
EA1AK/EA8 412K 1115-25-100 low power
ZS6NW 311K 988-25-81
******
Interesting Breakdowns (160-10, Q/Z/C)
W3LPL 128/21/66,581/27/100,1129/39/142,1580/40/152,729/36/131,230/23/74
N2RM 159/19/65,549/28/97,1139/37/131,1406/40/145,776/35/126,184/20/63
K1KI 151/13/52,458/21/85,929/36/129,1527/40/140,687/33/120,136/20/65
K3LR 166/18/59,347/25/88,1022/39/130,1343/38/134,633/33/111,125,19/59
VP5VW 887/16/74,1634/26/90,3,082/34/125,3468/37/115,2343/33/90,612/25/70
K1AR 53/13/47,498/22/92,672/35/122,1249/39/142,592/27/114,72/19/69
KC1XX 63/13/48,505/20/85,599/33/133,936/38/126,621/29/114,77/19/63
N3RS 36/12/32,257/21/84,933/37/136,715/40/138,592/33/124,61/16/58
K1TR 30/9/27,371/20/83,508/33/117,907/39/134,582/28/103,60/19/59
KM1H 45/7/30,329/19/61,730/34/105,795/33/102,592/25/94,68/14/40
K5ZD 97/13/43,265/18/64,631/31/105,835/34/108,614/23/77,49/14/35
W1KM 40/11/30,422/23/78,604/28/101,683/29/100,459/22/76,38/14/30
N2LT 46/12/30,169/15/54,459/32/99,909/37/111,389/23/84,31/12/26
N4RJ 29/11/22,137/22/56,583/30/99,859/34/106,550/31/92,43/14/32
N6BV/1 66/8/27,310/16/57,469/28/87,532/33/100,652/22/83,47/9/24
>From p_casier at eunet.be (Peter Casier) Sat Dec 3 14:53:54 1994
From: p_casier at eunet.be (Peter Casier) (Peter Casier)
Date: Sat, 3 Dec 1994 15:53:54 +0100
Subject: some EU cqww cw scores
Message-ID: <199412031453.PAA04318 at box.eunet.be>
Here are some EU CQWW CW scores I gathered in the EU score net we tried out
right after the contest. I was pretty tired, so mistakes might have slipped
in, sri!
For some remarks on the EU score net, pse see below!
Q Z C SCORE (MILLION)
M/S:
IQ4A 4700 193 674 +- 8.9
PI4CC 1200 110 370 1.6
OE2S 2700 150 472 3.1
OM3A 3400 166 572 4.8
4U1VIC 4231 170 540 5.0
M/M:
OL7O 6000 171 613 ?
SOA:
DJ2YA 1450 162 535 2 (ASSISTED)
S59A 2600 -----650----- 3.5 (NON-ASSISTED)
TM7XX 2705 132 453 3.1 (NON-ASSISTED)
F6FGZ 2664 130 388 +-3 (NON-ASSISTED)
SOSB:
S57AD 1106 27 93 .2 (80M)
ZA1AJ 2060 37 129 .6 (20M)
DJ7AA 1430 38 142 .432 (40M)
S58A 1220 35 98 .286 (80M)
HG0D 420 30 109 ? (10M)
Remarks on the EU score net:
The contest(s) end between 00:00 and 02:00 EU local time. This is pretty
late to spend another hour or more gathering scores. I think most people
want to start cleaning up the mess a bit, take a drink with the other ops,
and then disappear in bed. Maybe we should find another solution, like doing
it the next day around 19:00z on 80m. Of course this takes the thrill away
of knowing right after the contest, with the adreline still flowing, how
well you did... The advantage would be that we have a bit more time to
discuss propagation and do a more detailed breakdown etc...
Europeans, any suggestions? Remember, we have the 10m arrl coming up next
weekend. Might try it out again then. Pse let me know.
Peter
ON6TT.
p_casier at box.eunet.be
More information about the CQ-Contest
mailing list